Epygi QX Series System Recovery Procedure
  1. Manuals
  2. Brands
  3. Epygi Manuals
  4. Gateway
  5. QX series
  6. System recovery procedure

Epygi QX Series System Recovery Procedure

Hide thumbs Also See for QX Series:
1
2
3
4
5
6
7

Advertisement

Table of Contents

System Recovery Procedure for
Epygi Devices
Abstract:
This guide describes the System Emergency Recovery Procedure for Epygi devices.
Please Note:
This document contains confidential and proprietary information owned by Epygi Technologies, LTD. Any copying, use or disclosure of
the document or the information contained herein without the written permission of Epygi Technologies, LTD. is strictly prohibited.
Copyright © 2003-2017 Epygi Technologies, LTD. All Rights Reserved.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the QX Series and is the answer not in the manual?

Questions and answers

Related Manuals for Epygi QX Series

Summary of Contents for Epygi QX Series

  • Page 1 This guide describes the System Emergency Recovery Procedure for Epygi devices. Please Note: This document contains confidential and proprietary information owned by Epygi Technologies, LTD. Any copying, use or disclosure of the document or the information contained herein without the written permission of Epygi Technologies, LTD. is strictly prohibited.
  • Page 2 System Recovery Procedure for Epygi Devices Table of Contents Introduction ....................4 Requirements ....................5 System Recovery Procedure ................ 5 References ....................7 Revision 1.2 23-Mar-17...
  • Page 3 System Recovery Procedure for Epygi Devices Document Revision History Revision Date Description Valid for FW Valid for Models 6.0.2 and higher QX IP PBXs 6.0.2 and higher QX Gateways 02-Sep-15 Initial Release 5.3.1 and higher Quadro IP PBXs 5.3.1 and higher Quadro Gateways 6.0.2 and higher...

  • Page 4: Introduction

    System Recovery Procedure for Epygi Devices 1 Introduction This document describes the System Emergency Recovery Procedure on the Epygi QX/Quadro IP PBXs and Gateways (herein Epygi devices). Power loss or an accidental activation of the reset button while the device is updating the firmware (FW) or trying to boot up ten times without finishing the booting process may cause the device to have no valid FW anymore.

  • Page 5: Requirements

    System Recovery Procedure for Epygi Devices 2 Requirements Below are listed the required specifications for the recovery procedure: • PC with Operating systems: Windows 10, Windows 7, Windows XP, Windows Vista, • TFTP Server software installed on a PC (e.g. – Tftpd32).
  • Page 6 System Recovery Procedure for Epygi Devices Run tftpd32.exe program and configure the following parameters (Figure 4): • Current Directory requires the path of the XX-SW.bin file stored on the PC. • Server interface requires the IP address of the PC: 172.30.0.100 for IP PBXs and 172.28.0.100 for...

  • Page 7: References

    THIS DOCUMENT IS PROVIDED TO YOU FOR INFORMATIONAL PURPOSES ONLY. The information furnished in this document, believed by Epygi Technologies to be accurate as of the date of publication, is subject to change without notice. Epygi Technologies assumes no responsibility for any errors or omissions in this document and shall have no obligation to you as a result of having made this document available to you or based upon the information it contains.

This manual is also suitable for:

Quadro seriesQx20Qx50Qx200Qx500Qxisdn4+ ... Show all

Table of Contents