Users Menu; Extensions Management - Epygi Quadro2x Administrator's Manual

Hide thumbs Also See for Quadro2x:

Table of Contents

Quadro Baseline

Users Menu

The Extensions Management is used to create a variety of extensions and auto attendants on the Quadro. From this page, by clicking on the user

extension, administrator can get the extension settings pages.

Two types of user extensions, active and inactive, can be created on the Quadro. Active extensions are those that are attached to a line, can place

and receive calls and use available telephony services. Inactive extensions are those that are not attached to the line. They can use some available

telephony services but they cannot place and receive calls. Instead, inactive extensions have a voice mailbox available to store the messages from

callers.

Quadro2x has two available lines and up to two active extensions can be established.

Attendant extensions are dedicated to the IVR system on the Quadro. These extensions are used by callers to reach Quadro's users and use the

remote access and call relay services. It is possible to create Auto Attendants with the custom scenarios. By default, Quadro has one Auto Attendant

extension (00) which is undeletable.

The Extensions table is a list of all extensions and their parameters.

Quadro2x, Quadro2xi; SW Version 4.0.x

Quadro2x Manual II: Administrator's Guide – Administrator's Graphical User Interface

Fig. II-56: Telephone Users Menu in Dynamo Theme

Fig. II-57: Telephone Users Menu in Plain Theme

Fig. II-58: Extensions Management page

Table of Contents

Do you have a question about the Quadro2x and is the answer not in the manual?

Quadro2xi