Events - Epygi Quadro2x Administrator's Manual

Quadro Baseline
The Update now without feedback functional button performs manual checking and update of the availability new configurations but will not log any

events.

The Download current configuration in a legible format link refers to the Configuration Summary page where a partial or complete
configuration can be defined and downloaded or viewed.
The Configuration Summary page is used to define a partial
configuration and to download it to a PC or to view it directly in
the browser.
In the text field on this page, the partial configuration to be
downloaded should be specified. Pressing Start generate a
legible configuration file will start parsing the configuration
structure of the device. Progress will be seen in the area below.
The Cancel generation process button appears when the
configuration generation procedure starts and it is used to stop it.
The Download generated configuration button becomes
available when the legible configuration generation is finished. It
is used to download the generated file to the PC in a plain text
format. Necessary changes can be made in the downloaded
configuration file and then uploaded back to the system.
Attention: Make sure the changes you have done in the downloaded legible configuration file are valid and will not corrupt the system when being
uploaded back to device.
View generated configuration button becomes available when the legible configuration generation is finished. It is used to view the generated file
directly in the browser. The Upload a legible configuration file link refers to the page where the configuration file can be uploaded in a text format.
The Browse button in the opened page is used to browse certain legible configuration file to be uploaded and updated to the system. Configuration
files to be uploaded should be in the *.txt format, otherwise a system error occurs. The configuration file upload progress will be displayed in the area
below.
Events
The Events page has two tables. All system events that have occurred will be displayed in one table and event settings will be displayed in the other.
The System Events page may be accessed through the Events
link from the main menu. It lists information about system events
that have occurred on Quadro. When a new event takes place, a
record is added to the System Event table. For failure events
(priority 2 and 3, see below), the warning "Please check your
pending events!" will appear at the bottom of all management
pages.
The system events and the warning message are visible only for
the administrator. The warning link, (which leads directly to the
System Events page) will disappear from the management
pages if the administrator has marked all new events as "read".
Quadro2x, Quadro2xi; SW Version 4.0.x
Quadro2x Manual II: Administrator's Guide – Administrator's Graphical User Interface
:
Fig. II-30 Configuration Summary page
:
Fig. II-31 Event Warning on the Main Menu page
20