Procedure - Agilent Technologies L4532A Series Service Manual

4
Calibration and Adjustment

Procedure

1
2
3
50
Remove all input con n ection s to the digitizer.
Running the test from the r emote inter face:
Make a con nection to the digitizer usin g the Web In ter face (see
a
Navigatin g the Web Inter face
En ter the Remote Control Page
b
Clear any er ror s pr esent in the digitizer er ror queue, as follows:
c
click the
View Errors
er rors.
Click the Run Self-Test
d
t ake approximately 60 seconds to complete and you may hear the
digitizer in ter nal r elays switchin g during the procedur e. The
fron t- pan el display and the Histor y dialog box on the con trol pan el
page in dicate progr ess of the test. If the self- test is successful,
Self-test Passed is repor ted. If any self- test fails, Self-Test
Failed is r epor ted, and the Histor y dialog box on the con trol
panel page lists er ror number s and messages for each failed test.
The table on page 77
As in step 2.c, view, n ote and clear any er ror s.
e
Running the test from I/ O Librar ies:
Make a con nection to the digitizer usin g the Agilent Con nection
a
Exper t (see Con necting to Your PC
Click the In teractive IO Button to open the command win dow.
b
Read any er rors pr esent in the digitizer er ror queue by sending the
c
SYSTem:ERRor? quer y r epeatedly un til no er ror s ar e r epor ted.
Send the *TST? quer y to begin the self test and retur n a result.
d
The self test will take approximately 60 seconds to complete and
you may hear the digitizer in ter n al r elays switchin g dur in g the
procedur e. The Instrument Session History
progress, test outcome, er ror number s and er ror messages. The
table on page 77
As in step 3.c, view, n ote and clear any er ror s.
e
If all t est s pass, you have a high con fid en ce (> 90%) t hat t he d igit izer is
oper at ion al. The self-t est er r or messages an d t heir mean in g ar e shown
begin n in g on page 77.
on page 37).
an d click the
button and an swer
button to begin the self test. The self test will
lists self test er ror n umber s and messages.
lists self test er ror number s and messages.
Utilities
YES to view an d clear any
on page 34).
dialog box r epor ts test
Agilent L4532A/ 34A Service Guide
tab.