5
Service and Repair
Removing the Cover
To r emove the cover :
1
WARN IN G
2
3
82
Tur n off the digitizer an d r emove the power cord. Remove all cables
from the in str ument.
The L4532A/ 34A digitizers do not have an off mode. The power
supply is always energized when plugged into a live source, even when
the unit is in standby mode. Disconnect power and all other connectors
before removing the cover.
Remove the # 10 Tor x round head scr ew holdin g the cover through the
rear panel to the chassis.
Remove the six # 10 Tor x flat- head scr ews (thr ee at each side of the
digitizer) holding the cover to the chassis.
Step 2
Step 3
Agilent L4532A/ 34A Service Guide