Bottom Display Line - Agilent Technologies L4532A Series Service Manual

Bottom Display Line

The bottom line displays LX I/LAN information. LXI always has precedence over LAN information. For
example if the LXI Identification is sent to an instrument it must be displayed instead of any LAN
information.
If LXI information is displayed:
If LAN information is displayed: it is the current IP Address.
If a firmware update is in progress:
Agilent L4532A/ 34A Service Guide
LXI-Power - The backlight of the display will in dicate that the power
is on .
LXI-IDENT - A r equest for LXI instr ument identification has been
sen t to the digitizer. A subsequent r equest must be sent to disable this
message.
*
- LXI LAN fault in dicator.
these are the possible messages:
progress messages are displayed.
2
Introduction
21