Table of Contents
Advertisement
Quick Links
Agilent L4400 Series LXI Instruments
Command Quick Reference
Version 1.0
Syntax Conventions
•
Braces ( { } ) enclose the parameter choices for a given command string. The braces are not sent with the
command string.
•
A vertical bar ( | ) separates multiple parameter choices for a given command string.
•
Triangle brackets ( < > ) indicate that you must specify a value for the enclosed parameter. The brackets are not sent
with the command string. You must specify a value for the parameter.
•
Some parameters are enclosed in square brackets ( [ ] ). The square brackets indicate that the parameter is optional
and can be omitted. The brackets are not sent with the command string. If you do not specify a value for an optional
parameter, the instrument chooses a default value.
Measurement Commands
MEASure:DIGital? {BYTE|1|WORD|2|LWORd|4}, [< voltage >,] [{NORMal|INVerted} , ] (@< ch_list >)
MEASure:TOTalize? [{READ|RRESet} , ] (@< ch_list >)
Temperature Configuration Commands
Thermocouple Configuration
[SENSe:]TEMPerature:RJUNction[:INTernal]? (@< ch_list> )
Digital I/O and Totalizer Configuration Commands
Digital I/O Configuration
CONFigure:DIGital {BYTE|1|WORD|2|LWORd|4}, [< voltage >,] [{NORMal|INVerted},] (@< ch_list >)
CONFigure:DIGital:DIRection {INPut|0|OUTPut|1}, (@< ch_list >)
CONFigure:DIGital:DIRection? (@< ch_list >)
CONFigure:DIGital:HANDshake SYNChronous, [< thresh_voltage >, [< level_voltage >, [< polarity >,]]] (@< ch_list >)
CONFigure:DIGital:HANDshake:CTIMe {< seconds >|MIN|MAX|DEF}, (@< ch_list >)
CONFigure:DIGital:HANDshake:CTIMe? [{MIN|MAX},] (@< ch_list >)
CONFigure:DIGital:HANDshake:DRIVe {ACTive|OCOLlector}, (@< ch_list >)
CONFigure:DIGital:HANDshake:DRIVe? (@< ch_list >)
CONFigure:DIGital:HANDshake:POLarity {NORMal|INVerted}, [{H0|0|H1|1|H2|2|ALL},] (@< ch_list >)
CONFigure:DIGital:HANDshake:POLarity? {H0|0|H1|1|H2|2}, (@< ch_list >)
CONFigure:DIGital:HANDshake:RATE {< frequency >|MIN|MAX|DEF}, (@< ch_list >)
CONFigure:DIGital:HANDshake:RATE? [{MIN|MAX},] (@< ch_list >)
1
Advertisement
Table of Contents
Related Manuals for Agilent Technologies L4400 Series
Summary of Contents for Agilent Technologies L4400 Series
-
Page 1: Syntax Conventions
Agilent L4400 Series LXI Instruments Command Quick Reference Version 1.0 Syntax Conventions • Braces ( { } ) enclose the parameter choices for a given command string. The braces are not sent with the command string. • A vertical bar ( | ) separates multiple parameter choices for a given command string. - Page 2 CONFigure:DIGital:HANDshake:STATe {HIMPedance|OFF|ON}, (@< ch_list >) CONFigure:DIGital:HANDshake:STATe? (@< ch_list >) CONFigure:DIGital:HANDshake:SYNChronous:STRobe[:SOURce] {INTernal|EXTernal}, (@< ch_list >) CONFigure:DIGital:HANDshake:SYNChronous:STRobe[:SOURce]? (@< ch_list >) CONFigure:DIGital:INTerrupt:POLarity {NORMal|INVerted}, (@< ch_list >) CONFigure:DIGital:INTerrupt:POLarity? (@< ch_list >) CONFigure:DIGital:POLarity {NORMal|INVerted}, (@< ch_list >) CONFigure:DIGital:POLarity? (@< ch_list >) CONFigure:DIGital:WIDTh {BYTE|1|WORD|2|LWORd|4}, (@< ch_list >) CONFigure:DIGital:WIDTh? (@<...
- Page 3 [SENSe:]DIGital:MEMory:STARt (@< ch_list >) [SENSe:]DIGital:MEMory:STEP (@< ch_list >) [SENSe:]DIGital:MEMory:STOP (@< ch_list >) SOURce:DIGital:MEMory:TRACe < name >, (@< channel> ) SOURce:DIGital:MEMory:TRACe? (@< channel> ) [SENSe:]DIGital:THReshold {< voltage >|MIN|MAX|DEF}, (@< ch_list >) [SENSe:]DIGital:THReshold? [{MIN|MAX},] (@< ch_list> ) SOURce:DIGital:LEVel {< voltage >|MIN|MAX|DEF}, (@< ch_list >) SOURce:DIGital:LEVel? [{MIN|MAX},] (@<...
- Page 4 Totalizer Configuration CONFigure:COUNter:DCYCle [{< gate_time >|MIN|MAX|DEF},] (@< ch_list >) CONFigure:COUNter:FREQuency [{< gate_time >|MIN|MAX|DEF},] (@< ch_list >) CONFigure:COUNter:PERiod [{< gate_time >|MIN|MAX|DEF},] (@< ch_list >) CONFigure:COUNter:PWIDth [{< gate_time >|MIN|MAX|DEF},] (@< ch_list >) CONFigure:COUNter:TOTalize [{READ|RRESet},] (@< ch_list >) CONFigure:TOTalize [{READ|RRESet},] (@< ch_list >) MEASure:COUNter:DCYCle? [{<...
- Page 5 [SENSe:]TOTalize:SLOPe {NEGative|POSitive}, (@< ch_list >) [SENSe:]TOTalize:SLOPe? (@< ch_list >) [SENSe:]TOTalize:THReshold[:MODE] {AC|TTL}, (@< ch_list >) [SENSe:]TOTalize:THReshold[:MODE]? (@< ch_list >) [SENSe:]TOTalize:THReshold:VOLTage {< voltage >|MIN|MAX|DEF}, (@< ch_list >) [SENSe:]TOTalize:THReshold:VOLTage? [{MIN|MAX},] (@< ch_list >) [SENSe:]TOTalize:TYPE {READ|RRESet}, (@< ch_list >) [SENSe:]TOTalize:TYPE? (@< ch_list >) External Clock Output Configuration SOURce:MODule:CLOCk:FREQuency {<...
- Page 6 Trace Waveform Configuration SOURce:FUNCtion:CLOCk:EXTernal:DIVisor {< value >|MIN|MAX|DEF}, (@< ch_list> ) SOURce:FUNCtion:CLOCk:EXTernal:DIVisor? [{MIN|MAX}, ] (@< ch_list> ) SOURce:FUNCtion:CLOCk:SOURce {INTernal|EXTernal|STEP}, (@< ch_list> ) SOURce:FUNCtion:CLOCk:SOURce? (@< ch_list> ) SOURce:FUNCtion:CURRent:GAIN {< gain >|MIN|MAX|DEF}, (@< ch_list> ) SOURce:FUNCtion:CURRent:GAIN? [{MIN|MAX}, ] (@< ch_list> ) SOURce:FUNCtion:CURRent:OFFSet {< offset >|MIN|MAX|DEF}, (@< ch_list> ) SOURce:FUNCtion:CURRent:OFFSet? [{MIN|MAX}, ] (@<...
-
Page 7: Monitor Commands
Monitor Commands ROUTe:MONitor:DATA? ROUTe:MONitor:STATe {OFF|0|ON|1} ROUTe:MONitor:STATe? ROUTe:MONitor[:CHANnel] (@< channel> ) ROUTe:MONitor[:CHANnel]? ROUTe:MONitor[:CHANnel]:ENABle {OFF|0|ON|1}, (@< ch_list> ) ROUTe:MONitor[:CHANnel]:ENABle? (@< ch_list> ) Scan Configuration Commands ABORt INITiate FORMat:BORDer {NORMal|SWAPped} FORMat:BORDer? FORMat:DATA {ASCii,9|REAL,32|REAL,64} FORMat:READing:ALARm {OFF|0|ON|1} FORMat:READing:ALARm? FORMat:READing:CHANnel {OFF|0|ON|1} FORMat:READing:CHANnel? FORMat:READing:TIME {OFF|0|ON|1} FORMat:READing:TIME? FORMat:READing:TIME:TYPE {ABSolute|RELative} FORMat:READing:TIME:TYPE? FORMat:READing:UNIT {OFF|0|ON|1} FORMat:READing:UNIT? -
Page 8: Switch Control Commands
TRIGger:COUNt {< count >|MIN|MAX|DEF|INFinity} TRIGger:COUNt? [{MIN|MAX}] TRIGger:SOURce {IMMediate|BUS|EXTernal|ALARm1|ALARm2|TIMer} TRIGger:SOURce? TRIGger:SOURce:ALARm[:MODE] {SINGle|CONTinuous} TRIGger:SOURce:ALARm[:MODE]? TRIGger:TIMer {< seconds >|MIN|MAX|DEF} TRIGger:TIMer? [{MIN|MAX}] Switch Control Commands ROUTe:CHANnel:DRIVe:CLOSe:DEFault (@< ch_list> ) ROUTe:CHANnel:DRIVe:CLOSe:DEFault? (@< ch_list> ) ROUTe:CHANnel:DRIVe:OPEN:DEFault (@< ch_list> ) ROUTe:CHANnel:DRIVe:OPEN:DEFault? (@< ch_list> ) ROUTe:CHANnel:DRIVe:PAIRed[:MODE] {OFF|0|ON|1}, (@< ch_list> ) ROUTe:CHANnel:DRIVe:PAIRed[:MODE]? (@<... - Page 9 ROUTe:OPERation:OVERlap[:ENABle] {OFF|0|ON|1} ROUTe:OPERation:OVERlap[:ENABle]? ROUTe:RMODule:BANK:DRIVe[:MODE] {TTL|OCOLlector}, {1-4|BANK1-BANK4|ALL}, (@< rem_ch_list >) ROUTe:RMODule:BANK:DRIVe[:MODE]? {1-4|BANK1-BANK4}, (@< rem_ch_list >) ROUTe:RMODule:BANK:LED:DRIVe[:ENABle] {OFF|0|ON|1}, {1-4|BANK1-BANK4|ALL}, (@< rem_ch_list >) ROUTe:RMODule:BANK:LED:DRIVe[:ENABle]? {1-4|BANK1-BANK4}, (@< rem_ch_list >) ROUTe:RMODule:BANK:LED:DRIVe:LEVel {< amps >|MIN|MAX|DEF}, {1-4|BANK1-BANK4|ALL}, (@< rem_ch_list >) ROUTe:RMODule:BANK:LED:DRIVe:LEVel? {1-4|BANK1-BANK4}, (@< rem_ch_list >) ROUTe:RMODule:BANK:PRESet {1-4|BANK1-BANK4|ALL}, (@< rem_ch_list >) ROUTe:RMODule:DRIVe:LIMit {<...
-
Page 10: Triggering Commands
Triggering Commands *TRG INITiate READ? (@< ch_list >) TRIGger:COUNt {< count >|MIN|MAX|DEF|INFinity} TRIGger:COUNt? [{MIN|MAX}] TRIGger:DELay {< seconds >|MIN|MAX} TRIGger:DELay? [{MIN|MAX}] TRIGger:DELay:AUTO {OFF|0|ON|1} TRIGger:DELay:AUTO? TRIGger:SOURce {IMMediate|BUS|EXTernal|TIMer} TRIGger:SOURce? TRIGger:TIMer {< seconds >|MIN|MAX|DEF} TRIGger:TIMer? [{MIN|MAX}] Alarm Limit Commands CALCulate:LIMit:LOWer {< value >|MIN|MAX|DEF}, (@< ch_list> ) CALCulate:LIMit:LOWer? [{MIN|MAX},] (@<... -
Page 11: Reading Memory Commands
Measurement Statistics Commands CALCulate:AVERage:AVERage? (@<ch_list>) CALCulate:AVERage:CLEar (@<ch_list>) CALCulate:AVERage:COUNt? (@<ch_list>) CALCulate:AVERage:MAXimum? (@<ch_list>) CALCulate:AVERage:MAXimum:TIME? (@<ch_list>) CALCulate:AVERage:MINimum? (@<ch_list>) CALCulate:AVERage:MINimum:TIME? (@<ch_list>) CALCulate:AVERage:PTPeak? (@<ch_list>) DATA:LAST? ,(@< channel >) Reading Memory Commands DATA:POINts:EVENt:THReshold < num_readings > DATA:POINts:EVENt:THReshold? DATA:POINts? DATA:REMove? < num_readings > FETCh? FORMat:DATA {ASCii,9|REAL,32|REAL,64} R? [< max_count >] SYSTem:TIME:SCAN? Calibration Commands CALibration? -
Page 12: State Storage Commands
State Storage Commands *RCL {1|2|3|4|5} *SAV {1|2|3|4|5} MEMory:NSTates? MEMory:STATe:CATalog? MEMory:STATe:DELete {1|2|3|4|5} MEMory:STATe:DELete:ALL MEMory:STATe:NAME {1|2|3|4|5} [,< name >] MEMory:STATe:NAME? {1|2|3|4|5} MEMory:STATe:RECall:AUTO {OFF|0|ON|1} MEMory:STATe:RECall:AUTO? MEMory:STATe:RECall:SELect {0|1|2|3|4|5} MEMory:STATe:RECall:SELect? MEMory:STATe:VALid? {1|2|3|4|5} IEEE-488 Commands *CLS *ESE < enable_value > *ESE? *ESR? *IDN? *OPC *OPC? *RCL {1|2|3|4|5} *RST *SAV {1|2|3|4|5} *SRE <... -
Page 13: System-Related Commands
System-Related Commands *IDN? *RST *TST? CALibration:LFRequency {50|60|400} CALibration:LFRequency? SYSTem:ABUS:INTerlock:SIMulate {OFF|0|ON|1} SYSTem:ABUS:INTerlock:SIMulate? SYSTem:CDEScription? 1 SYSTem:CDEScription:RMODule? (@< rem_ch >) [,{DISTribution1-DISTribution4}] SYSTem:CPON 1 SYSTem:CTYPe? 1 SYSTem:CTYPe:RMODule? (@< rem_ch >) [,{DISTribution1-DISTribution4}] SYSTem:DATE < yyyy >,< mm >,< dd > SYSTem:DATE? SYSTem:DELay[:IMMediate] < time > SYSTem:ERRor? SYSTem:PRESet SYSTem:SECurity:IMMediate... -
Page 14: Lan Configuration Commands
LAN Configuration Commands SYSTem:COMMunicate:LAN:AUTOip {OFF|0|ON|1} SYSTem:COMMunicate:LAN:AUTOip? SYSTem:COMMunicate:LAN:BSTatus? SYSTem:COMMunicate:LAN:CONTrol? SYSTem:COMMunicate:LAN:DHCP {OFF|0|ON|1} SYSTem:COMMunicate:LAN:DHCP? SYSTem:COMMunicate:LAN:DNS "< address >" SYSTem:COMMunicate:LAN:DNS? SYSTem:COMMunicate:LAN:DOMain "< name >" SYSTem:COMMunicate:LAN:DOMain? [{CURRent|STATic}] SYSTem:COMMunicate:LAN:GATEway "< address >" SYSTem:COMMunicate:LAN:GATEway? [{CURRent|STATic}] SYSTem:COMMunicate:LAN:HISTory:CLEar SYSTem:COMMunicate:LAN:HISTory? SYSTem:COMMunicate:LAN:HOSTname "< name >" SYSTem:COMMunicate:LAN:HOSTname? [{CURRent|STATic}] SYSTem:COMMunicate:LAN:IPADdress "< address >" SYSTem:COMMunicate:LAN:IPADdress? [{CURRent|STATic}] SYSTem:COMMunicate:LAN:KEEPalive {<... - Page 15 STATus:MODule:EVENt? STATus:MODule:SLOT1:CONDition? STATus:MODule:SLOT1:ENABle < enable_value > STATus:MODule:SLOT1:ENABle? STATus:MODule:SLOT1[:EVENt]? STATus:OPERation:CONDition? STATus:OPERation:ENABle < enable_value > STATus:OPERation:ENABle? STATus:OPERation[:EVENt]? STATus:PRESet STATus:QUEStionable:CONDition? STATus:QUEStionable:ENABle < enable_value > STATus:QUEStionable:ENABle? STATus:QUEStionable[:EVENt]? SYSTem:ALARm? SYSTem:MODule? Service-Related Commands DIAGnostic:RELay:CYCLes? (@< ch_list> ) DIAGnostic:RELay:CYCLes:CLEar (@< ch_list> )