AUMA ACE C 01.2 Profinet Series Manual page 70

Appendix
ID Type Parameters
PRM 2309 enum MCM
PRM 2339 enum PSO (target)
PRM 2325 enum PSO
PRM 45 enum I/O interface (target)
PRM 604 enum I/O interface
PRM 2415 enum I/O interface 2 (target)
PRM 2399 enum I/O interface 2
PRM 181 enum Fieldbus (target)
PRM 600 enum Fieldbus
PRM 1752 enum MWG (target)
PRM 606 enum MWG
PRM 5080 enum Target_FQM_available
PRM 5081 enum Target_FQM_available
PRM 5091 enum Target_MotorCtrl_avail.
PRM 5092 enum Actual_MotorCtrl_avail.
Table 89: FQM information
ID Type Parameters
Data length = 42 bytes
PRM 5079 enum FQM action
PZD 1626 BOOL FQM active
70
Access Default Setting value
R 0 0: Not available
1: Available
R 0 0: Not available
1: Available
R 0 0: Not available
1: Available
R 1 0: Not available
1: Available
R 0 0: Not available
1: Available
R 0 0: Not available
1: Available
R 0 0: Not available
1: Available
R 0 0: No fieldbus
1: Profibus
2: Modbus
3: Foundation Fieldbus
4: HART
5: Profinet
R 0 0: No fieldbus
1: Profibus
2: Modbus
3: Foundation Fieldbus
4: HART
5: Profinet
R 0 0: Not available
1: Available
R 0 0: Not available
1: Available
R 0 0 : Not available
1 : Available
R 0 0 : Not available
1 : Available
R 0 0 : Not available
1 : Available
R 0 0 : Not available
1 : Available
Access Default Setting value
R 1 : FQM deactivated
2 : CLOSE
3 : OPEN
R Min = 0
Max = 1
Actuator controls
AC 01.2/ACExC 01.2 Profinet
Explanation
'MCM' (Motor Control and Mon-
itoring / A52) electronics sub-
assembly
Target configuration of 'PSO'
(Power Supply Options ( A52.1)
electronics sub-assembly
'PSO' (Power Supply Options /
A52.1) electronics sub-assembly
Target configuration of 'I/O inter-
face' electronics sub-assembly
(A1.0)
'I/O interface' electronics sub-
assembly (A1.0)
Target configuration of 'I/O inter-
face 2' electronics sub-assembly
(A1.1)
'I/O interface 2' electronics sub-
assembly (A1.1)
Target configuration of 'Fieldbus'
electronics sub-assembly (A1.8)
'Fieldbus' electronics sub-as-
sembly (A1.8)
Target configuration of 'MWG'
(magnetic limit and torque
transmitter / B6) electronics sub-
assembly
'MWG' (magnetic limit and
torque transmitter / B6) electron-
ics sub-assembly
Hardware configuration, target:
Target FQM available / not
available?
Hardware configuration, actual:
Actual FQM available / not
available?
Explanation
Target position of FQM (fail
safe) for fail safe request.
The fail safe operation of FQM
is executed.