AUMA ACE C 01.2 Profinet Series Manual page 30

Description of the data interface
Table 27: Byte 32: SIL signals
Bit Designation
(process representation)
1)
0 Safe ESD
1)
1 Safe Stop
1)
2 SIL fault
1)
3 SIL function active
4 FQM active
5 FQM init.
6 FQM fail safe fault
7 —
1) The safety function indications via communication interface are for information only and must not be used as part of a safety function.
The I/O signals of the SIL module must be used for this purpose.
4.2. Output data (process representation output)
4.2.1. Process representation output arrangement
Information
30
Prm-Text-Def GSD file
Safe ESD
Safe STOP
SIL fault
SIL function active
—
—
—
—
Byte 33 to byte 40: Reserve
The contents are reserved for future extensions.
The consumer (controller) can control the provider (actuator) via the process
representation output.
To perform remote operations, the selector switch must be in position Remote
control (REMOTE).
Module definition
Module ID="ID_MODULE_ADI_OUT_0"
ModuleIdentNumber="0x00008100"
ModuleInfo CategoryRef=Output
Name TextId="Inputs"
InfoText TextId="Prozessabbild Output Daten"
Sub-module definition
VirtualSubmoduleItem ID="ID_SUBMOD_ADI_OUT_0"
SubmoduleIdentNumber="0x00002200"
API="0"
FixedInSubslots="2"
Name TextId="Outputs"
InfoText TextId="Prozessabbild Output Daten"
I/O data definition in sub-module
IOData IOPS_Length="1"
IOCS_Length="1"
Output Consistency="All items consistency">
Value Description
1 Safe ESD (Emergency Shut Down) safety function of the
SIL sub-assembly is active.
0 No signal
1 Safe STOP safety function of the SIL sub-assembly is
active.
0 No signal
1 Collective signal
Warning: A SIL fault of the SIL sub-assembly has oc-
curred.
0 No signal
1 A safety function of the SIL sub-assembly is active.
0 No signal
FQM Failsafe Active
FQM Failsafe Init
FQM Failsafe Error
No signal (reserved)
Actuator controls
AC 01.2/ACExC 01.2 Profinet