AUMA ACE C 01.2 Profinet Series Manual page 71

Actuator controls
AC 01.2/ACExC 01.2 Profinet
ID Type Parameters
PZD 1627 BOOL FQM init.
PZD 1628 BOOL FQM fail safe fault
PZD 1593 BOOL FQM FS ready
PZD 1595 BOOL FQM FS diag. result
PZD 1629 BOOL FQM end pos. open
PZD 1630 BOOL FQM end pos. closed
PZD 1598 BOOL FQM FS-ESD request
PZD 108 BOOL FQM collective fault
PZD 1771 BOOL FQM timeout
Access Default Setting value
R Min = 0
Max = 1
R Min = 0
Max = 1
R Min = 0
Max = 1
R Min = 0
Max = 1
R Min = 0
Max = 1
R Min = 0
Max = 1
R Min = 0
Max = 1
R Min = 0
Max = 1
R Min = 0
Max = 1
Appendix
Explanation
FQM (fail safe) is initialised
(constant force spring is being
wound).
FQM fail safe fault active
FQM unit is ready to execute a
fail safe operation
The diagnostic result of winding
and blinker contact is indicated
as faulty
FQM fail safe position OPEN
reached
FQM fail safe position CLOSED
reached
Fail safe function of FQM (fail
safe) is requested. (ESD reques-
ted).
FQM collective signal active
aus:
FQM FS-Diag Result
FQM Timeout Tension
FQM Timeout Limit
FQM Timeout Motor
FQM Fault Temperature or
voltage monitoring
FQM Fail safe fault
FQM time exceeded for end po-
sition operation (limit) and/or
winding procedure (tension)
71