AUMA ACE C 01.2 Profinet Series Manual page 51

Actuator controls
AC 01.2/ACExC 01.2 Profinet
ID Type Parameters
PRM 1872 U16 Fail.pos.OPEN CLOSE
PRM 4809 U16 Failure position MPV
Table 55: Customer settings > EMCY behaviour
ID Type Parameters
Data length = 26 bytes
PRM 68 enum EMCY fail.reac.
PRM 67 enum EMCY operation mode
PRM 2924 enum EMCY source
PRM 230 enum EMCY operation
PRM 4808 U16 EMCY position MPV
PRM 231 U16 EMCY position
PRM 70 enum By-pass torque
PRM 69 enum Thermal by-pass
PRM 71 enum By-pass timer
PRM 2950 enum By-pass operat.profile
PRM 3255 enum By-pass Interlock
Ac- Default Setting value
cess
R/W 500 Min = 0 [0.1 %]
Max = 1000 [0.1 %]
R/W 500 Min = 0 [0.1 %]
Max = 1000 [0.1 %]
Ac- Default Setting value
cess
R/W 1 1: Good signal first
2: Immediately active
R/W 0 0: Remote only
1: Remote and local
R/W 3 1: I/O interface
2: Fieldbus interface
3: I/O or fieldbus
4: Active interface
R/W 0 0: STOP
1: CLOSE
2: OPEN
3: Approach EMCY pos.
R/W 10 Min = 0 [0.1 s]
Max = 1800 [0.1 s]
R/W 0 Min = 0 [0.1 %]
Max = 1000 [0.1 %]
R/W 0 0: Off
1: On
R/W 0 0: Off
1: On
R/W 0 0: Off
1: On
R/W 0 0: Off
1: On
R/W 0 0: Off
1: On
Appendix
Explanation
Failure position for OPEN-
CLOSE duty
Failure position of multiport
valve
Explanation
EMERGENCY failure reaction.
The EMERGENCY failure reac-
tion defines the actuator beha-
viour once the EMERGENCY
signal is initiated.
Determines the availability of
EMERGENCY behaviour de-
pending on the selector switch
position Local or Remote
Source for EMERGENCY beha-
viour
Actuator reaction in EMER-
GENCY operation mode
EMERGENCY position of multi-
port valve
Setting the EMERGENCY posi-
tion
By-passing the torque monitor-
ing in EMERGENCY operation
mode
By-passing the thermal monitor-
ing in EMERGENCY operation
mode
By-passing the timer function in
EMERGENCY operation mode
By-pass of operation profile in
EMERGENCY operation mode
By-pass of interlock function in
operation mode EMERGENCY
51