AUMA ACE C 01.2 Profinet Series Manual page 67

Actuator controls
AC 01.2/ACExC 01.2 Profinet
ID Type Parameters
PRM 4761 I32 Min. temp. controls
PRM 4760 I32 Max. temp. MWG
PRM 4764 I32 Min. temp. MWG
PRM 5061 I32 Max. vibration
PRM 3484 I16 Reset operating data
Table 84: Asset Management > Event report
ID Type Parameters
Data length = 10 bytes
PRM 185 U16 File size event. rep.
PRM 186 U16 Save interval
PRM 187 U16 Buffer size
PRM 189 enum System event filter
Ac- Default Setting value
cess
R Min = 100 [°C]
Max = +150 [°C]
R Min = 100 [°C]
Max = +150 [°C]
R Min = 100 [°C]
Max = +150 [°C]
R Min = 100 [°C]
Max = +150 [°C]
R/W
Access Default Setting value
R 548 Min = 0
Max = 1024
R 50000 Min = 1000
Max = 65535
R 50 Min = 10
Max = 100
R 31 0: Commands
1: Parameterization
2: Enable processes
3: System events
4: Simulation
Appendix
Explanation
Minimum temperature of con-
trols
Maximum temperature of MWG
Minimum temperature of MWG
Maximum actuator vibration
Value = 1:Deleting operating
data
Explanation
File size = number of events to
be recorded x 56/1024 kBytes
Save interval for event data from
buffer
Max. number of events in the
buffer
The event filter for System
defines which system events are
to be recorded into the event
report.
67