AUMA ACE C 01.2 Profinet Series Manual page 52

Appendix
ID Type Parameters
PRM 3295 enum By-pass Local STOP
PRM 4015 MMSS01 Delay time
Table 56: Customer settings > Timer
ID Type Parameters
Data length = 20 bytes
PRM 590 enum Step mode CLOSE
PRM 592 MMSS01 On time CLOSE
PRM 591 MMSS01 Off time CLOSE
PRM 594 U16 Start stepping CLOSE
PRM 593 U16 End stepping CLOSE
PRM 13 enum Step mode OPEN
PRM 7 MMSS01 On time OPEN
PRM 8 MMSS01 Off time OPEN
52
Ac- Default Setting value
cess
R/W 0 0: Off
1: On
R 10 Min = 0 [0.1 s]
Max = 1800 [0.1 s]
Ac- Default Setting value
cess
R/W 0 0: Off
1: Remote
2: Local
3: Remote and local
R/W 50 Min = 10 [0.1 s]
Max = 1800 [0.1 s]
R/W 50 Min = 10 [0.1 s]
Max = 1800 [0.1 s]
R/W 1000 Min = 1 [0.1 %]
Max = 1000 [0.1 %]
R/W 0 Min = 0 [0.1 %]
Max = 999 [0.1 %]
R/W 0 0: Off
1: Remote
2: Local
3: Remote and local
R/W 50 Min = 10 [0.1 s]
Max = 1000 [0.1 s]
R/W 50 Min = 10 [0.1 s]
Max = 1000 [0.1 s]
Actuator controls
AC 01.2/ACExC 01.2 Profinet
Explanation
By-pass of local STOP function
in EMERGENCY operation
mode
Delay time for EMERGENCY
behaviour (EMERGENCY beha-
viour is only executed after the
delay time has expired).
Explanation
Setting the operation mode:
Stepping mode in direction
CLOSE
Setting the on time in direction
CLOSE
Setting the off time in direction
CLOSE
Setting the start of stepping
mode in direction CLOSE
Setting the end of stepping
mode in direction CLOSE
Setting the operation mode:
Stepping mode in direction
OPEN
Setting the on time in direction
OPEN
Setting the off time in direction
OPEN