AUMA ACE C 01.2 Profinet Series Manual page 34

Description of the data interface
34
If the multiport valve function is active (option), the entire byte 6 is used for coding
of multiport valve operation commands. Up to 16 positions can either be approached
selecting the shortest travel, in clockwise direction (CW), or in counterclockwise
direction (CCW). Furthermore, the actuator can also be operated without any position
indications in clockwise or counterclockwise direction (CW or CCW).
Table 31: Operation commands via byte 6 for activated multiport valve function
Value ≙ Operation direction/posi-
tion
0x01 Position 1
0x02 Position 2
0x04 Position 3
0x08 Position 4
0x10 Position 5
0x20 Position 6
0x40 Position 7
0x80 Position 8
0x81 Position 9
0x82 Position 10
0x83 Position 11
0x84 Position 12
0x85 Position 13
0x86 Position 14
0x87 Position 15
0x88 Position 16
0x90 CW
0x91 CW Position 1
0x92 CW Position 2
0x93 CW Position 3
0x94 CW Position 4
0x95 CW Position 5
0x96 CW Position 6
0x97 CW Position 7
0x98 CW Position 8
0x99 CW Position 9
AC 01.2/ACExC 01.2 Profinet
Behaviour
Position 1 is approached selecting the shortest
travel
Position 2 is approached selecting the shortest
travel
Position 3 is approached selecting the shortest
travel
Position 4 is approached selecting the shortest
travel
Position 5 is approached selecting the shortest
travel
Position 6 is approached selecting the shortest
travel
Position 7 is approached selecting the shortest
travel
Position 8 is approached selecting the shortest
travel
Position 9 is approached selecting the shortest
travel
Position 10 is approached selecting the shortest
travel
Position 11 is approached selecting the shortest
travel
Position 12 is approached selecting the shortest
travel
Position 13 is approached selecting the shortest
travel
Position 14 is approached selecting the shortest
travel
Position 15 is approached selecting the shortest
travel
Position 16 is approached selecting the shortest
travel
Actuator operates in clockwise direction (without
stop at any position).
Position 1 is approached in clockwise direction
(CW).
Position 2 is approached in clockwise direction
(CW).
Position 3 is approached in clockwise direction
(CW).
Position 4 is approached in clockwise direction
(CW).
Position 5 is approached in clockwise direction
(CW).
Position 6 is approached in clockwise direction
(CW).
Position 7 is approached in clockwise direction
(CW).
Position 8 is approached in clockwise direction
(CW).
Position 9 is approached in clockwise direction
(CW).
Actuator controls