Stratasys J826 User Guide
To prevent excess printing material from accumulating around the print
Cleaning the
heads, a splash shield is installed on the bottom of the print block. Remove
Print-Head
the shield and clean it once a month, when cleaning the print heads (see
Splash Shield
"Cleaning the Print Heads, Roller and Wiper" on page 4-36).
To remove the print-head splash shield:
1. Run the Cleaning wizard from the Options menu.
2. Open the printer and place a mirror on the build tray.
3. Put on cleaning gloves.
Caution
Uncured printing material on the print heads might cause skin irritation. Use
disposable cleaning gloves to protect your hands.
DOC-28000 Rev. D
When the printer moves components to the cleaning position, the
following screen appears.
Figure 4-68 Wizard screen during cleaning tasks
4 Operating and Maintaining the Printer
4-50