Cal Kit Operational Check; Equipment Required - Keysight Technologies U3022AE10 User's And Service Manual

U3022AE10

Cal Kit Operational Check

Cal Kit Operational Check
The following procedure can be used to confirm that the test set and network
analyzer are operational. The operation verification limits provided ensure that your
test set and network analyzer are operating properly. Refer to
Specifications" on page

Equipment Required

The test set requires that the user be familiar with the equipment and components
listed in Table 15.
This section provides an equipment list and setup of the network analyzer and test
set.
Table 15 Equipment List
Description
N4693A 2.4 mm ECal Module 10 MHz - 50 GHz (Option 00F or M0F) or
N4691A 3.5 mm ECal Module 10 MHz to 26.5 GHz (Option 00F or M0F) or
N4691B 3.5 mm ECal Module 300 kHz to 26.5 GHz (Option 00F or M0F) or
Mechanical cal kit 85052B or 85052D
N5232A/B 4-Port Network Analyzer (Option 416 and 551) or
N5242A/B 4-Port Network Analyzer (Option 400 and 551) or
N5242A/B 2-Port Network Analyzer (Option 200 and 551)
Set of interconnect cables (analyzer to test set), see
60
14.
Keysight U3022AE10 User's and Service Guide
"General
Table 3 on page 13.
Qty
1
1
1