Safety And Regulatory Information; Introduction; Safety Earth Ground; Statement Of Compliance - Keysight Technologies U3022AE10 User's And Service Manual

U3022AE10

Safety and Regulatory Information

Safety and Regulatory Information

Introduction

Review this product and related documentation to familiarize yourself with safety markings and
instructions before you operate the instrument.
This product has been designed and tested in accordance with accepted industry standards, and has been
supplied in a safe condition. The documentation contains information and warnings that must be followed
by the user to ensure safe operation and to maintain the product in a safe condition.

Safety Earth Ground

This is a Safety Class I Prod uct (provided with a protective earthing ground incorporated
in the power cord). The mains plug shall only be inserted in a socket outlet provided with
a protective earth contact. Any interruption of the protective cond uctor inside or outside
of the prod uct is likely to make the prod uct dangerous. Intentional interruption is
prohibited.
Always use the three prong AC power cord supplied with this product. Failure to ensure
adequate earth grounding by not using this cord may cause product damage and the risk
of electrical shock.

Statement of Compliance

This product has been designed and tested in accordance with accepted industry standards, and has been
supplied in a safe condition. The documentation contains information and warnings that must be followed
by the user to ensure safe operation and to maintain the product in a safe condition.

Connector Care and Cleaning Precautions

Remove the power cord to the instrument. To clean the connectors use alcohol in a well ventilated area.
Allow all residual alcohol moisture to evaporate, and fumes to dissipate prior to energizing the instrument.
To prevent electrical shock, d isconnect the Keysight U3022AE10 from mains electrical
supply before cleaning. Use a dry cloth or one slightly dampened with water to clean the
external case parts. Do not attempt to clean internally.
If flammable cleaning materials are used, the material shall not be stored, or left open in
the area of the equipment. Adequate ventilation shall be assured to prevent the
combustion of fumes, or vapors.
Keysight U3022AE10 User's and Service Guide 89