Cal Kit Operational Check; Verification Limits - Keysight Technologies U3047AM12 User's And Service Manual

U3047AM12

Cal Kit Operational Check

Cal Kit Operational Check
The following procedure can be used to confirm the 1-Port Cal operation of an
ECal module or Mechanical Cal Kit with the U3047AM12 Test Set. The
operation verification limits provided ensure that your U3047AM12 and
network analyzer are operating properly. Refer to
Operational Check Failure" on page 66
installed and working correctly before returning the test set for repairs.

Verification Limits

Specifications for the test set are typical. System performance for the network
analyzer and test set are only characteristic and intended as non-warranted
information. Only a functional certificate is provided for the test set.
It is recommended that you return your instrument to Keysight Technologies for
servicing or repair if the test set and network analyzer performance exceed the
operational verification limits.
A periodic calibration is not required. The Operators Check should be
performed after System Setup, or if performance is in question. An N-Port
calibration should be performed before making a measurement. Refer to
on page 15
If you suspect that your 16-Port configuration is not operating properly,
NOTE
ensure that all front RF jumper interconnect cables are correctly attached.
Table 13 System Verification Limits
Frequency
10 MHz to 500 MHz
500 MHz to 3.2 GHz
3.2 GHz to 10 GHz
10 GHz to 16 GHz
16 GHz to 20 GHz
20 GHz to 26.5 GHz
26.5 GHz to 43.5 GHz
43.5 GHz to 50 GHz
50 GHz to 67 GHz
a. Reflection Tracking takes into account Source Loss, Receiver Loss, Margin, and network analyzer Mixer Cal.
60
.
a
Ports 13 to 16 Ports 9 to 12
- 3 dB - 3 dB
- 6 dB - 5 dB
- 7 dB - 6 dB
- 8 dB - 7 dB
- 8 dB - 7 dB
- 10 dB - 9 dB
- 12 dB - 11 dB
- 16 dB - 13 dB
- 17 dB - 14 dB
"Verifying Cal Kit
to ensure the RF interface cables are
Ports 5 to 8
- 3 dB
- 4 dB
- 5 dB
- 6 dB
- 6 dB
- 8 dB
- 10 dB
- 10 dB
- 11 dB
Keysight U3047AM12 User's and Service Guide
Table 6
Ports 1 to 4
- 3 dB
- 4 dB
- 6 dB
- 7 dB
- 8 dB
- 9 dB
- 10 dB
- 11 dB
- 13 dB