U3022AE10
Controlling the Test Set with N5222A/B, N5232A/B or N5242A/B
How to Access Interface Control Settings
This section will describe how to setup and operate the test set with the analyzer.
1. To access the Interface Control mode, select
The analyzer includes the Interface Control application and rear panel connection.
Please review this application before connecting the test set to the network analyzer.
Information regarding this application can be found in the Help menu, Interface
Control.
Figure 39
Interface Control Application
46
Trace/Chan > Channel > Hard ware Setup > Interface Control -OR-
(Instrument > Setup > Internal Hardware > Interface Control...) in the drop-down
menu, and select Enable Interface Control.
Keysight U3022AE10 User's and Service Guide
Need help?
Do you have a question about the U3022AE10 and is the answer not in the manual?