Interface Boards; Power Supplies - Siemens SIMOVERT FC Operating Instructions Manual

08.96
6.2

Interface boards

The boards, listed in the following table must be externally mounted and wired-up on the external system side.
Desig- Description
nation
SCI1 Serial I/O board (only in conjunction with SCB1).
Analog and binary input and outputs for coupling to the
SCB1 via fiber-optic cable
SCI2 Serial I/O board (only in conjunction with SCB1)
Binary inputs and outputs for coupling to the SCB1 via
fiber-optic cable.
DTI Digital tachometer interface
ATI Analog tachometer interface
Table 6.4 Interface boards
6.3

Power supplies

Designation
Power supply, 0.3 A
Power supply 1 A
Power supply 5 A
Table 6.5 Recommended power supply
Siemens AG 6SE7087-6AH70
SIMOVERT MASTER DRIVES
Description
115 V / 230 V AC - 24 V 0.3 A DC
115 V / 230 V AC - 24 V 1 A DC
115 V / 230 V AC - 24 V 5 A DC
Operating Instructions
Order No.
Board 6SE7090-0XX84-3EA0
description 6SE7087-6CX84-0BC0
Board 6SE7090-0XX84-3EF0
description 6SE7087-6CX84-0BC0
Board 6SE7090-0XX84-3DB0
description 6SE7087-6CX84-3DB0
Board 6SE7090-0XX84-3DF0
description 6SE7087-6CX84-3DF0
Order number
Option
6SX7010-0AC14
6SX7010-0AC15
6EP1333-1SL11
Options
Use with
e.g.: DTI
e.g.: 1 x SCI
Basic conv
6-3