Profibus Communication
7.2 AnyBus Profibus Modbus Module
7.2
AnyBus Profibus Modbus Module
Description
The Anybus Profibus Modbus™ module supports Profibus communication. The module plugs
into the Network 1 connector or the Network 2 connector on the NXGPro+ DCR, as shown in
figure NXGPro+ Control in the Introduction chapter.
The following figure shows the connector and status indicators on the Anybus™ Profibus
Modbus™ module.
Status Indicators
The following figure shows the status indicators.
Figure 7-1
①
Operation Mode LED State
②
Module Status LED State
③
Profibus Connector
Refer to the following tables to view explainations of the operation mode status LED and module
status LED.
Table 7-1
Operation Mode LED
LED State
Off
Green
108
Anybus Profibus M40 AB6600 with logo
1
Description
Not online / No power
Online, data exchange
NXGPro+ Communication Manual
Function Manual, AA, A5E50226719