Console Port Speed; Log And Trace; Viewing Error Log - ZyXEL Communications Prestige 316 User Manual

Routing
ZyNOS F/W Version
Ethernet Address
IP Address
IP Mask
DHCP

9.2.2 Console Port Speed

You can change the speed of the console port through Menu 24.2.2 – System Maintenance – Change
Console Port Speed. Your Prestige supports 9600 (default), 19200, 38400, 57600, and 115200 bps for the
console port. Use [space bar] to select the desired speed in Menu 24.2.2, as shown next.
Press Space Bar to Toggle.
Figure 9-5
9.3

Log and Trace

There are two logging facilities in the Prestige. The first is the error logs and trace records that are stored
locally. The second is the UNIX syslog facility for message logging.

9.3.1 Viewing Error Log

The first place you should look for clues when something goes wrong is the error/trace log. Follow the
procedures next to view the local error/trace log:
Step 1.
Select 24 from the main menu to open Menu 24 – System Maintenance.
Step 2.
From Menu 24, select option 3 to open Menu 24.3 – System Maintenance – Log and Trace.
System Information and Diagnosis
Refers to the routing protocol used.
Refers to the version of ZyXEL's Network Operating System software.
Refers to the Ethernet MAC (Media Access Control) address of your Prestige.
This is the IP address of the Prestige in dotted decimal notation.
This shows the IP mask of the Prestige.
This field shows the DHCP setting of the Prestige.
Menu 24.2.2 – System Maintenance – Change Console Port Speed
Console Port Speed: 115200
Press ENTER to Confirm or ESC to Cancel:
Menu 24.2.2 – System Maintenance – Change Console Port Speed
Prestige 316 Broadband Sharing Gateway / Wireless LAN
9-5