Log And Trace; Viewing Error Log; Figure 298 Menu 24.2.2: System Maintenance: Change Console Port Speed; Figure 299 Menu 24.3: System Maintenance: Log And Trace - ZyXEL Communications ZyWALL 5 User Manual

Figure 298 Menu 24.2.2: System Maintenance: Change Console Port Speed

37.4 Log and Trace

There are two logging facilities in the ZyWALL. The first is the error logs and trace records
that are stored locally. The second is the UNIX syslog facility for message logging.

37.4.1 Viewing Error Log

The first place you should look for clues when something goes wrong is the error/trace log.
Follow the procedure below to view the local error/trace log:
1 Select option 24 from the main menu to open Menu 24 - System Maintenance.
2 From menu 24, select option 3 to open Menu 24.3 - System Maintenance - Log and
Trace.
3 Select the first option from Menu 24.3 - System Maintenance - Log and Trace to
display the error log in the system.
After the ZyWALL finishes displaying, you will have the option to clear the error log.

Figure 299 Menu 24.3: System Maintenance: Log and Trace

Examples of typical error and information messages are presented in the following figure.
Chapter 37 System Information & Diagnosis
Menu 24.2.2 - System Maintenance - Change Console Port Speed
Console Port Speed: 9600
Press ENTER to Confirm or ESC to Cancel:Press
Space Bar to Toggle.
Menu 24.3 - System Maintenance - Log and Trace
1. View Error Log
2. UNIX Syslog
4. Call-Triggering Packet
Please enter selection
ZyWALL 5 User's Guide
483