Console Port Speed; Log And Trace; Viewing Error Log; Figure 30-5 System Maintenance - Change Console Port Speed - ZyXEL Communications Prestige 792H User Manual

30.3.2 Console Port Speed

You can set up different port speeds for the console port through Menu 24.2.2 – System Maintenance –
Console Port Speed. Your Prestige supports 9600 (default), 19200 and 38400 bps. Press [SPACE BAR]
and then [ENTER] to select the desired speed in menu 24.2.2, as shown in the following figure.
Figure 30-5 System Maintenance – Change Console Port Speed
Once you change the Prestige consol port speed, you must also set the speed
parameter for the communication software you are using to connect to the

30.4 Log and Trace

There are two logging facilities in the Prestige. The first is the error logs and trace records that are stored
locally. The second is the UNIX syslog facility for message logging.

30.4.1 Viewing Error Log

The first place you should look for clues when something goes wrong is the error log. Follow the
procedures to view the local error/trace log:
Step 1. Type 24 in the main menu to display Menu 24 – System Maintenance.
Step 2. From menu 24, type 3 to display Menu 24.3 – System Maintenance – Log and Trace.
System Maintenance
Menu 24.2.2 – System Maintenance – Change Console Port Speed
Console Port Speed: 115200
Press ENTER to Confirm or ESC to Cancel:
Menu 24.3 - System Maintenance - Log and Trace
1. View Error Log
2. UNIX Syslog
Please enter selection
Figure 30-6 System Maintenance — Log and Trace
Prestige.
Prestige 792H User's Guide
30-5