Chapter 17: SNMP trap configuration using
Use SNMP traps and notifications to allow management stations to gather information about switch
activities, alarms, and other information.
Specify which protocols and processes generate traps by enabling traps for that protocol. For example,
to allow SNMP traps to be generated for OSPF, use the following command: ip ospf trap enable.
For information about configuring SNMP community strings and related topics, see Avaya Ethernet
Routing Switch 8800/8600 Security, NN46205-601.
Roadmap of SNMP trap ACLI commands
The following roadmap lists some of the ACLI commands and their parameters that you can
use to complete the procedures in this section.
Privileged EXEC mode
clear logging
show snmp-server host
show snmp-server notify-
filter
show syslog
show syslog host <1-10>
Global Configuration mode
snmp-server
Troubleshooting
the ACLI
Command
Parameter
agent-conformance enable
authentication-trap enable
force-iphdr-sender enable
force-trap-sender enable
notify-filter <WORD 1-32> <WORD
1-32>
sender-ip <A.B.C.D> <A.B.C.D>
July 2013
309