Multicast troubleshooting using EDM
Variable definitions
Use the information in the following table to help you understand the Source tab fields.
SourceAddress
IngressPort
Viewing multicast routes by egress VLAN
With the Egress VLANs tab, you can view the egress VLANs for the streams corresponding to
the selected entry in the Mroute-Hw table.
Procedure steps
1. In the navigation tree, open the following folders: IP > Multicast.
2. Click the Mroute-HW tab.
3. Click any row in the table.
4. Click EgressVlans.
EgressVlans tab
Use the information in the following table to help you use the EgressVlans tab.
EgressVlan
EgressVlanPorts
390
Troubleshooting
Variable
Variable
All the egress VLANs for the particular multicast stream
selected from the Mroute-HW table.
The corresponding ports for the particular multicast stream
selected from the Mroute-HW table.
Comments? infodev@avaya.com
Value
The IP addresses of the sources on this particular
subnet sending traffic to the multicast group for the
selected entry in the Mroute-HW table.
The corresponding ingress port in the multicast
stream selected from the Mroute-HW table.
Value
July 2013