Configuring Performance Khi; Configuring Protocol Khi - Avaya 8800 Troubleshooting Manual

Software troubleshooting tool configuration using CLI

Configuring performance KHI

Use this procedure to configure performance KHI.
Performance KHI displays the performance key health indicators, such as utilization status for
CPU and switch fabric.
Procedure steps
1. To enable the KHI feature globally, enter:
2. To enable the performance KHI feature, enter:
3. To display performance KHI information, enter:
4. To clear performance KHI statistics, enter:

Configuring protocol KHI

Use this procedure to configure protocol KHI.
Protocol KHI tracks the health of the following protocols:
• OSPF
• BGP
• IST/SMLT
• PIM
• IGMP
• VLACP
• RTM and FDB table statistics
Protocol KHI also provides statistics and historical data for protocol and neighbor state
transitions. It also allows for the establishment of reference timestamps and reference data to
track protocol health in the network. It supports VRFs.
Every protocol has a large number of parameters that can be tracked, but only the key
parameters are tracked by the KHI. Protocol information is collected and displayed on-demand,
132 Troubleshooting
config sys set khi khi-enable <true|false>
config sys set khi performance-khi-enable <true|false>
show khi performance
clear khi performance
Comments? infodev@avaya.com
July 2013