Multicast troubleshooting using the ACLI
Job aid: show ip igmp snoop-trace command
The following figure shows the field descriptions for this command.
Table 29: show ip igmp snoop-trace command
Field
GROUP ADDRESS
SOURCE ADDRESS
IN VLAN
TYPE
IN PORT
OUT VLAN
OUT PORT
Viewing PGM interface errors
Display general information about PGM errors that occurred on the selected interface.
Prerequisites
• Access Privileged EXEC mode.
Procedure steps
Show PGM interface errors using the following command:
412
Troubleshooting
Indicates the IP multicast group address for which this entry
contains information.
Indicates the source of the multicast traffic.
Indicates the incoming VLAN ID.
Specifies where the data stream is learned from (ACCESS or
NETWORK). ACCESS indicates that the data stream is learned
from the UNI ports. NETWORK shows that it is learned from the
SPBM cloud. This field is only shown with Layer 2 VSN
constrained streams.
Indicates the incoming port number.
Indicates the outgoing VLAN ID.
Indicates the outgoing port number.
Comments? infodev@avaya.com
Description
July 2013