Multicast troubleshooting using the ACLI
show ip pgm interface error [nak]
Job aid: show ip pgm interface error nak command
The following table describes fields for this command.
Table 31: show ip pgm interface error nak parameters
CCT
IN_NAK PORT ERRORS
IN_NAK NO_SESSION
ERRORS
IN_NAK SEQ ERRORS
IN_NNAK PORT ERRORS
IN_NNAK NO_SESSION
ERRORS
PARITY NAK_TG ERRORS
Viewing multicast routes
The multicast route table contains multicast routing information for all group addresses.
Prerequisites
• Access Privileged EXEC mode.
Procedure steps
1. Show group trace information using the following command:
414
Troubleshooting
Field
Displays the circuit number of the selected interface.
Displays the number of NAKs discarded because they
were received on the wrong interface.
Displays the number of NAKs discarded because there
was no active session.
Displays the number of NAKs discarded because they
were out of sequence.
Displays the number of NNAKs discarded because they
were received on the wrong interface.
Displays the number of NNAKs discarded because there
was no active session.
Displays the number of parity NAKs discarded because
they were out of the parity TG window.
Comments? infodev@avaya.com
Description
July 2013