Viewing Multicast Routing Process Statistics - Avaya 8800 Troubleshooting Manual

SEND TRAP ONLY
SEND TRAP AND LOG

Viewing multicast routing process statistics

To provide additional troubleshooting information, you can enable the collection and display
of multicast routing process statistics. These statistics are not related to the interface (port)
statistics. The statistics display based on VRF and multicast group classification. To configure
multicast routing process statistics, perform the following procedure.
Procedure steps
1. To enable or disable the multicast routing process statistics collection, enter:
2. To view the feature configuration, enter:
3. To view the multicast routing process statistics, enter:
4. To display statistics at regular intervals (average of approximately 5 seconds),
5. To clear the multicast routing process statistics, enter:
Variable definitions
Use the information in the following table to use the commands above.
Troubleshooting
Field
Indicates the status of sending traps only
Indicates the status of sending traps and log messages
config ip mroute stats {enable|disable}
[no] ip mroute stats enable
config ip mroute info
show ip mroute stats <grp-ip-list> [vrf <vrf-name>] [vrfids
<vrfids>]
enter:
monitor ip mroute stats <grp-ip-list> [vrf <vrf-name>]
[vrfids <vrfids>]
clear ip mroute stats
Viewing multicast routing process statistics
Description
July 2013 403