Avaya 8800 Troubleshooting Manual page 415

2. Show group prune state information using the following command:
Variable definitions
Use the information in the following table to use the show ip mroute commands.
hw-group-trace
[<A.B.C.D>] [<A.B.C.D>]
hw-group-prune-state
[<A.B.C.D>]
Job aid: show ip mroute-hw command output
Use the information in the following table to help you understand the show ip mroute-hw
command output.
Table 32: show ip mroute-hw group-trace and group-prune-state output fields
Field
group-trace
GROUP ADDRESS
Troubleshooting
show ip mroute hw-group-trace [<A.B.C.D>] [<A.B.C.D>]
show ip mroute hw-group-prune-state [<A.B.C.D>]
Variable
The IP multicast group address for the multicast stream.
Use the show ip mroute hw-group-trace
command as follows:
• When you use it by itself, the output includes all the
group entries found in the hardware records.
• When you follow the command with
[<A.B.C.D>] , the output includes all the entries
corresponding to the specified group address.
• When you follow the command with
[<A.B.C.D>] , the output includes only the
specified source-group pair.
show ip mroute hw-group-prune-
Use the
state command as follows:
• When you use it by itself, the output includes all the
group entries found in the hardware records.
• When you follow the command with
[<A.B.C.D>] , the output includes all the entries
corresponding to the specified group address.
Description
Viewing multicast routes
Value
[<A.B.C.D>]
July 2013 415