Configuring Logging - Avaya 8800 Troubleshooting Manual

Log configuration using the CLI
config sys set msg-control
force-msg
show cli clilog info
show clilog file [tail]
[grep <value>]
show log file [tail]
[name-of-file <value>]
[category <value>]
[severity <value>] [CPU
<value>] [save-to-file
<value>]
show log level

Configuring logging

You can configure log file parameters, as well as write, or clear the log file automatically created
by the system.
Procedure steps
1. Define which messages are logged:
2. Write the log file from memory to a file:
3. Use the following table to help you configure other parameters as required.
298 Troubleshooting
Command
config log level [<level>]
config log write <str>
Comments? infodev@avaya.com
Parameter
control-interval <minutes>
disable
enable
info
max-msg-num <number>
add <str>
del <str>
info
Important:
The show log file tail name-of-
file <filename>
produce any output if the
The workaround is to redirect the output to
another file using the save-to-file option and
view the log file in a text editor.
command does not
tail
option is used.
July 2013