Chapter 26: Multicast troubleshooting
Use the information in this section to help you troubleshoot multicast routing problems using the Avaya
command line interface (ACLI).
Viewing multicast group trace information for IGMP snoop
Multicast group trace tracks the data flow path of the multicast streams.
Prerequisites
• Access Privileged EXEC mode.
Procedure steps
Display the multicast group trace for an IGMP snoop-enabled interface using the
following command:
show ip igmp snoop-trace [source <A.B.C.D>] [group <A.B.C.D>]
Variable definitions
Use the information in the following table to use the show ip igmp snoop-trace
command.
group <A.B.C.D>
source <A.B.C.D>
Troubleshooting
using the ACLI
Variable
Specifies the source IP address in the format a.b.c.d
Specifies the group IP address in the format a.b.c.d
Value
July 2013
411