Avaya 8800 Troubleshooting Manual page 238

Software troubleshooting tool configuration using ACLI
Prerequisites
• Access Global Configuration mode.
Procedure steps
1. Create a port mirroring instance:
2. Configure the mode:
3. Enable the mirroring instance:
4. Modify existing mirroring entries as required:
5. Ensure that your configuration is correct by using the following command:
Variable definitions
Use the information in the following table to help you use the mirror-by-port <1-383>
command.
in-port <portList>
{monitor-mlt <1-256>|
monitor-vlan <0-4094>| out-
port <portList>}
238 Troubleshooting
mirror-by-port <1-383> in-port <portList> {monitor-mlt
<1-256>|monitor-vlan <0-4094>|out-port <portList>}
<1-383> specifies the mirror-by-port entry ID in the range of 1 to 383.
mirror-by-port <1-383> mode <tx|rx|both|rxFilter|txFilter|
bothFilter>
mirror-by-port <1-383> enable
mirror-by-port mirror-port <1-383> <portList>
mirror-by-port monitor-mlt <1-383> <1-256>
mirror-by-port monitor-port <1-383> <portList>
mirror-by-port monitor-vlan <1-383> <0-4094>
show mirror-by-port
Variable
Comments? infodev@avaya.com
Value
Creates a new mirror-by-port table entry.
• in-port <portList>
mirrored port.
• monitor-mlt <1-256>
mirroring MLT ID from 1 to 256.
specifies the
specifies the
July 2013