Showing The Hardware Resource Usage - Avaya 8800 Troubleshooting Manual

Multicast troubleshooting using CLI
PRUNED
TIME LEFT FOR GRAFT
PRUNE RECEIVED FROM The IP address of the downstream neighbor from which the

Showing the hardware resource usage

The Avaya Ethernet Routing Switch 8800/8600 can query the number of ingress and egress
IP Multicast streams traversing your switch. After setting the thresholds for ingress and egress
records, if the record-usage goes beyond the threshold, you are notified by way of a trap on
the console, logged message, or both.
If you do not set the thresholds, the CLI displays only the ingress and egress records that are
currently in use.
Procedure steps
Show the hardware resource usage using the following command:
show ip mroute-hw resource-usage
Job aid: show ip mroute-hw resource-usage command
The following table shows the field descriptions for this command.
Table 24: show ip mroute-hw resource-usage parameter
EGRESS REC IN-USE
INGRESS REC IN-USE
EGRESS THRESHOLD
INGRESS THRESHOLD
LOG MSG ONLY
402 Troubleshooting
Field
True indicates that the multicast stream is pruned back. False
indicates it is not.
The time left (in seconds) for the neighboring downstream
router to send the graft message.
prune has been received.
Field
Indicates the number of egress records (peps) traversing
the switch that are in use
Indicates the number of source and group records
traversing the switch that are in use
Indicates the egress records threshold
Indicates the source and group records threshold
Indicates the status of logging messages only
Comments? infodev@avaya.com
Description
Description
July 2013