Avaya 8800 Troubleshooting Manual page 264

Software troubleshooting tool configuration using ACLI
You can use two sessions with this command: in one session, configure the ping snoop
commands, and in the other session, issue the logging screen command to see the
messages; when done, close the second session.
Prerequisites
• Access Global Configuration mode.
Procedure steps
1. Add the required ports to the ACL:
2. Enable the ACL:
3. Create an ACE:
4. Configure the ACE action:
5. Configure the destination IP address:
6. Configure the source IP address (optional):
7. Enable the ACE:
8. Ensure your configuration is correct:
Variable definitions
Use the information in the following table to help you use these commands.
<A.B.C.D>
264 Troubleshooting
filter acl port 4096 <portList>
filter acl 4096 enable
filter acl ace 4096 <1-1000> [name <WORD 0-32>]
<1-1000> is the ACE ID.
filter acl ace action 4096 <1-1000> <permit|deny>
filter acl ace ip 4096 <1-1000> dst-ip eq <A.B.C.D>
filter acl ace ip 4096 <1-1000> src-ip eq <A.B.C.D>
filter acl ace 4096 <1-1000> enable
show filter acl 4096
Variable
Comments? infodev@avaya.com
Value
Specifies the source or destination IP address.
July 2013