Viewing Igap Network Connectivity Information - Avaya 8800 Troubleshooting Manual

Viewing IGAP network connectivity information

IGMP for user Authentication Protocol (IGAP) counters provide network connectivity
information that you can use to monitor and troubleshoot IGAP interfaces.
Procedure steps
1. In the navigation tree, open the following folders Configuration > IP.
2. Click IGMP.
3. Click the IGAP Counters tab.
Variable definitions
Use the information in the following table to help you use the IGAP Counters tab.
IfIndex
AuthSuccess
AuthReject
RespTimeout
PapJoinReq
BasicQuery
BasicLeave
Troubleshooting
Variable
Viewing IGAP network connectivity information
Value
Indicates the VLAN name that uniquely identifies
the interface.
Indicates the number of authentication success
messages received from the RADIUS server on this
interface.
Indicates the number of authentication fail
messages received from the RADIUS server on this
interface.
Indicates the number of times that the
Authentication Timer timed out. This timer controls
the waiting time from sending an Authentication
request to receiving an Authentication response.
Indicates the number of Password Authentication
Protocol (PAP) Join requests received for members
of this interface.
Indicates the number of Basic Query messages
sent by the Avaya Ethernet Routing Switch
8800/8600 on an IGAP-enabled interface.
Indicates the number of Basic Leave messages
received by this interface.
July 2013 391