Accessing The Secondary Cpu; Configuring Pcap Global Parameters - Avaya 8800 Troubleshooting Manual

Software troubleshooting tool configuration using ACLI
vlan mac-address-
filter <1-4094> pcap
<0x00:0x00:0x00:0x00:
0x00:0x00> [enable]
Interface Configuration mode
pcap

Accessing the Secondary CPU

The PCAP engine is the Secondary CPU. You can gain access to the PCAP engine through
a direct console or modem connection to the secondary CPU, or by using a peer telnet session
from the primary CPU. A connection is made to the secondary CPU, which then prompts for
the login and password.
Prerequisites
• Access Privileged EXEC mode.
Procedure steps
1. Log on to the Primary CPU.
2. Access the Secondary CPU by entering the following command:

Configuring PCAP global parameters

Configure PCAP globally to define how PCAP operates on the Avaya Ethernet Routing Switch
8800/8600.
246 Troubleshooting
Command
peer telnet
Comments? infodev@avaya.com
Parameter
udp-port <0-65535> [<0-65535>]
user-defined <0-9600> <WORD 0-50>
vid <0-4092> [<0-4092>]
<1-1000>
acl-filter <1-4096>
enable [mode <tx|rx|both|rxFilter|
txFilter|bothFilter>]
July 2013