Table of Contents
Advertisement
6.8
FILE Group
The commands in this group deal with file operations.
You can make the same settings and inquiries as when FILE on the front panel is used.
:FILE?
Function
Queries all settings related to the file operation.
:FILE?
Syntax
:FILE? -> (same as the response to
Example
":FILE:SAVE?")
:FILE:CDIRectory
Function
Changes the current directory.
:FILE:CDIRectory {<Filename>}
Syntax
<Filename> = Directory name
:FILE:CDIRECTORY "IMAGE"
Example
Description Specify ".." to move up to the parent directory.
:FILE:DELete:IMAGe:{TIFF|BMP|PSCRipt
|PNG|JPEG}
Function
Deletes the screen image data file.
:FILE:DELete:IMAGe:{TIFF|BMP|
Syntax
PSCRipt|PNG|JPEG} {<Filename>}
:FILE:DELETE:IMAGE:TIFF "IMAG1"
Example
Description Specify the file name without the extension.
:FILE:DELete:NUMeric:{ASCii|FLOat}
Function
Deletes the numeric data file.
:FILE:DELete:NUMeric:{ASCii|
Syntax
FLOat} {<Filename>}
:FILE:DELETE:NUMERIC:ASCII "NUM1"
Example
Description Specify the file name without the extension.
:FILE:DELete:SETup
Function
Deletes the setup parameter file.
:FILE:DELete:SETup {<Filename>}
Syntax
:FILE:DELETE:SETUP "SETUP1"
Example
Description Specify the file name without the extension.
:FILE:DELete:WAVE:{BINary|ASCii|FLOat}
Function
Deletes the waveform display data file.
:FILE:DELete:WAVE:{BINary|ASCii|
Syntax
FLOat} {<Filename>}
:FILE:DELETE:WAVE:BINARY "WAVE1"
Example
Description Specify the file name without the extension.
IM WT3001E-17EN
:FILE:DRIVe
Function
Sets the target drive.
:FILE:DRIVe {PCCard[,<NRf>]|
Syntax
NETWork|USB,<NRf>[,<NRf>][,<NRf>]}
PCCard = PC card drive
<NRf> = Partition (0 to 3)
NETWork = Network drive
USB = USB memory drive
1st <NRf> = ID number (address)
2nd <NRf> = Partition (0 to 3) or LUN (logical unit
number: 0 to 3)
3rd <NRf> = Partition (0 to 3) when LUN is
specified
:FILE:DRIVE PCCARD
Example
Description • If the drive does not contain partitions, omit the
<NRf> corresponding to partitions.
• "NETWork" can be used when the Ethernet
interface (/C7 option) is installed.
• "USB" can be used when the USB port
(peripheral device) (/C5 option) is installed.
• The second or third <NRf> when USB is
selected can be omitted if the drive is not
partitioned or divided by LUN.
:FILE:FORMat:EXECute
Function
Formats the PC card.
:FILE:FORMat:EXECute
Syntax
:FILE:FORMAT:EXECUTE
Example
:FILE:FREE?
Function
Queries the free disk space (bytes) on the drive.
:FILE:FREE?
Syntax
:FILE:FREE? -> 163840
Example
:FILE:LOAD:ABORt
Function
Aborts file loading.
:FILE:LOAD:ABORt
Syntax
:FILE:LOAD:ABORT
Example
:FILE:LOAD:SETup
Function
Loads the setup parameter file.
:FILE:LOAD:SETup {<Filename>}
Syntax
:FILE:LOAD:SETUP "SETUP1"
Example
Description • Specify the file name without the extension.
• This command is an overlap command.
1
2
3
4
5
6
7
App
Index
6-47
Advertisement
Table of Contents
