Appendix 3 Ieee 488.2-1992 - YOKOGAWA WT3001E User Manual

Appendix 3 IEEE 488.2-1992

App-6
(10) Communication between devices that do not follow the response syntax
None.
(11) Size of the response data block
1 to 308922 bytes
(12) A list of supported common commands
See section 6.24, "Common Command Group."
(13) Device condition after a successful calibration
Measurement execution condition.
(14) The maximum length of block data that can be used for the *DDT trigger macro
definition
Not supported.
(15) The maximum length of the macro label for defining macros, the maximum
length of block data that can be used for the macro definition, and the process
when recursion is used in macro definitions
Macro functions are not supported.
(16) Reply to the IDN? query
See section 6.24, "Common Command Group."
(17) The size of the storage area for protected user data for *PUD and *PUD?
commands
*PUD and *PUD? are not supported.
(18) The length of the *RDT and *RDT? resource names
*RDT and *RDT? are not supported.
(19) The change in the status due to *RST, *LRN?, *RCL, and *SAV
*RST
See section 6.24, "Common Command Group."
*LRN?, *RCL, and *SAV
These common commands are not supported.
(20) The extent of the self-test using the *TST? command
Executes all the MEMORY tests (each internal memory) of the Self Test menu of
the MISC key.
(21) The structure of the extended return status
See chapter 7.
(22) Whether each command is processed in an overlap fashion or sequentially
See section 5.5, "Synchronization with the Controller" and chapter 6.
(23) The description of the execution of each command
See the functions of each command in chapter 6, User's Manual IM WT3001E-
01EN, and Expansion Function User's Manual IM WT3001E-51EN.
IM WT3001E-17EN