Table of Contents
Advertisement
6.18 NUMeric Group
:NUMeric:HOLD
Function
Sets whether to hold (ON) or release (OFF) all
the numeric data or queries the current setting.
:NUMeric:HOLD {<Boolean>}
Syntax
:NUMeric:HOLD?
:NUMERIC:HOLD ON
Example
:NUMERIC:HOLD? -> :NUMERIC:HOLD 1
Description • If :NUMeric:HOLD is turned ON before
executing " :NUMeric[:NORMal]:VALue? " or
" :NUMeric:LIST:VALue? ," all the numeric
data at that point can be held internally.
• As long as :NUMeric:HOLD is ON, the
numeric data is held even when the numeric
data on the screen is updated.
• For example, if you wish to retrieve various
types of numeric data of each element at the
same point, do the following:
:NUMeric:HOLD ON
:NUMeric[:NORMal]:ITEM1 U,1,TOTAL;
ITEM2 I,1,TOTAL;... (set the numeric
data items of element 1)
:NUMeric[:NORMal]:VALue?
(Receive the numeric data of element 1)
:NUMeric[:NORMal]:ITEM1 U,2,TOTAL;
ITEM2 I,2,TOTAL;... (set the numeric
data items of element 2)
:NUMeric[:NORMal]:VALue?
(Receive the numeric data of element 2)
...(omitted)...
:NUMeric[:NORMal]:ITEM1 U,4,TOTAL;
ITEM2 I,4,TOTAL;... (set the numeric
data items of element 4)
:NUMeric[:NORMal]:VALue?
(Receive the numeric data of element 4)
:NUMeric:HOLD OFF
• If ON is specified when :NUMeric:HOLD is
ON, the numeric data is cleared once, and the
most recent numeric data is held internally.
This method can be used when retrieving
numeric data continuously (no need to set
:NUMeric:HOLD to OFF each time).
6-92
:NUMeric:LIST?
Function
Queries all settings related to the numeric list
data output of harmonic measurement.
:NUMeric:LIST?
Syntax
:NUMERIC:LIST? ->
Example
:NUMERIC:LIST:NUMBER 1;
ORDER 100;SELECT ALL;ITEM1 U,1
Description • This command is valid only on models with the
advanced computation function (/G6 option).
• For the values of
" :NUMeric:LIST:ITEM<x> ," the numeric list
data output items for the amount specified by
" :NUMeric:LIST:NUMber " are output.
:NUMeric:LIST:CLEar
Function
Clears the output items of the numeric list data of
harmonic measurement (set to "NONE").
:NUMeric:LIST:CLEar {ALL|
Syntax
<NRf>[,<NRf>]}
ALL = Clear all items
1st <NRf> = 1 to 64 (Item number to start
clearing)
2nd <NRf> = 1 to 64 (Item number to end
clearing)
:NUMERIC:LIST:CLEAR ALL
Example
Description • This command is valid only on models with the
advanced computation function (/G6 option).
• If the 2nd <NRf> is omitted, the output items
from the start clear number to the last item (64)
are cleared.
IM WT3001E-17EN
Advertisement
Table of Contents
