YOKOGAWA WT3001E User Manual page 138

6.18 NUMeric Group
:NUMeric:LIST:SELect
Function Sets the output component of the numeric list
data of harmonic measurement or queries the
current setting.
:NUMeric:LIST:SELect {EVEN|ODD|ALL}
Syntax
:NUMeric:LIST:SELect?
:NUMERIC:LIST:SELECT ALL
Example
:NUMERIC:LIST:SELECT? ->
:NUMERIC:LIST:SELECT ALL
Description • This command is valid only on models with the
advanced computation function (/G6 option).
• The selections are as shown below:
EVEN = Outputs the components of TOTal,
DC, and even order harmonic
ODD = Outputs the components of TOTal, DC,
and odd order harmonic
ALL = Outputs all components
6-94
:NUMeric:LIST:VALue?
Function Queries the numeric list data of harmonic
measurement.
:NUMeric:LIST:VALue? {<NRf>}
Syntax
<NRf> = 1 to 64 (item number)
Example • Example when <NRf> is specified
:NUMERIC:LIST:VALUE? 1 ->
103.58E+00,0.00E+00,103.53E+00,
0.09E+00,2.07E+00,0.04E+00,
.. (omitted) ..,0.01E+00,0.01E+00 (up to
102 items of data)
• Example when <NRf> is omitted (when
" :NUMeric:LIST:NUMber " is 5)
:NUMERIC:LIST:VALUE? ->
103.58E+00,0.00E+00,103.53E+00,
0.09E+00,2.07E+00,0.04E+00,
.. (omitted) ..,0.00E+00,0.00E+00 (up to
102*5 = 510 items of data)
• Example in which " :NUMeric:FORMat " is set
to "FLOat"
:NUMERIC:LIST:VALUE? -> #6 (number of
bytes, 6 digits)(data byte sequence)
Description • This command is valid only on models with the
advanced computation function (/G6 option).
• A single numeric list data consists of
up to 102 items of numeric data in the
following order: TOTal, DC, 1st order, ...
" :NUMeric:LIST:ORDer. "
• If <NRf> is specified, only the numeric list data
of the item number is output (up to 102 items of
data).
• If <NRf> is omitted, the numeric
list data of item numbers from 1 to
" :NUMeric:LIST:NUMber " is output in order
(up to 102*" :NUMeric:LIST:NUMber " items
of data).
• For the format of the individual numeric data
that is output, see "Numeric Data Format" at
the end of this group of commands (see page
6-97).
IM WT3001E-17EN