YOKOGAWA WT3001E User Manual page 147

6.20 STATus Group
The commands in the STATus group are used to make settings and inquiries related to the status report. There are
no front panel keys that correspond to the commands in this group. For details on the status report, see chapter 7.
:STATus?
Function Queries all settings related to the communication
status function.
:STATus?
Syntax
:STATUS? -> :STATUS:EESE 0;
Example
FILTER1 NEVER;FILTER2 NEVER;
FILTER3 NEVER;FILTER4 NEVER;
FILTER5 NEVER;FILTER6 NEVER;
FILTER7 NEVER;FILTER8 NEVER;
FILTER9 NEVER;FILTER10 NEVER;
FILTER11 NEVER;FILTER12 NEVER;
FILTER13 NEVER;FILTER14 NEVER;
FILTER15 NEVER;FILTER16 NEVER;
QENABLE 1;QMESSAGE 1
:STATus:CONDition?
Function Queries the contents of the condition register.
:STATus:CONDition?
Syntax
:STATUS:CONDITION? -> 16
Example
Description For details on the condition register, see chapter 7,
"Status Report."
:STATus:EESE(Extended Event Status
Enable register)
Function Sets the extended event enable register or
queries the current setting.
:STATus:EESE <Register>
Syntax
:STATus:EESE?
<Register> = 0 to 65535
:STATUS:EESE #B0000000000000000
Example
:STATUS:EESE? -> :STATUS:EESE 0
Description For details on the extended event enable register,
see chapter 7, "Status Report."
:STATus:EESR?(Extended Event Status
Register)
Function Queries the content of the extended event
register and clears the register.
:STATus:EESR?
Syntax
:STATUS:EESR? -> 0
Example
Description For details on the extended event register, see
chapter 7, "Status Report."
IM WT3001E-17EN
:STATus:ERRor?
Function Queries the error code and message information
(top of the error queue).
:STATus:ERRor?
Syntax
:STATUS:ERROR? ->
Example
113,"Underfined Header"
Description • When there is no error, "0, "No error"" is
returned.
• The message cannot be returned in Japanese.
• You can specify whether to add the message
using the " STATus:QMESsage " command.
:STATus:FILTer<x>
Function Sets the transition filter or queries the current
setting.
:STATus:FILTer<x> {RISE|FALL|BOTH|
Syntax
NEVer}
:STATus:FILTer<x>?
<x> = 1 to 16
:STATUS:FILTER2 RISE
Example
:STATUS:FILTER2? -> :STATUS:FILTER2
RISE
Description • Specify how each bit of the condition register
is to change to set the event. If "RISE" is
specified, the event is set when the bit changes
from 0 to 1.
• For details on the transition, see chapter 7,
"Status Report."
:STATus:QENable
Function Sets whether to store messages other than
errors to the error queue (ON/OFF) or queries the
current setting.
:STATus:QENable {<Boolean>}
Syntax
:STATus:QENable?
:STATUS:QENABLE ON
Example
:STATUS:QENABLE? ->
:STATUS:QENABLE 1
:STATus:QMESsage
Function Sets whether to attach message information to
the response to the "STATus:ERRor?" query (ON/
OFF) or queries the current setting.
:STATus:QMESsage {<Boolean>}
Syntax
:STATus:QMESsage?
:STATUS:QMESSAGE ON
Example
:STATUS:QMESSAGE? ->
:STATUS:QMESSAGE 1
1
2
3
4
5
6
7
App
Index
6-103