Chapter 6 Communication Commands; List Of Commands - YOKOGAWA WT3001E User Manual

Chapter 6 Communication Commands
6.1

List of Commands

Command
ACQuisition Group
:ACQuisition?
:ACQuisition:BYTeorder
:ACQuisition:END
:ACQuisition:FORMat
:ACQuisition:HOLD
:ACQuisition:LENGth?
:ACQuisition:SEND?
:ACQuisition:SRATe?
:ACQuisition:STARt
:ACQuisition:TRACe
AOUTput Group
:AOUTput?
:AOUTput:NORMal?
:AOUTput[:NORMal]:CHANnel<x>
:AOUTput[:NORMal]:IRTime
:AOUTput[:NORMal]:MODE<x>
:AOUTput[:NORMal]:RATE<x>
CBCycle Group
:CBCycle?
:CBCycle:COUNt
:CBCycle:DISPlay?
:CBCycle:DISPlay:CURSor
:CBCycle:DISPlay:ITEM<x>
:CBCycle:DISPlay:PAGE
:CBCycle:FILTer?
:CBCycle:FILTer:LINE?
:CBCycle:FILTer[:LINE][:ALL]
:CBCycle:FILTer[:LINE]:ELEMent
<x>
:CBCycle:FILTer[:LINE]:MOTor
:CBCycle:RESet
:CBCycle:STARt
:CBCycle:STATe?
:CBCycle:SYNChronize?
IM WT3001E-17EN
Function
Queries all settings related to the output of the waveform sampling data.
Sets the output byte order of the waveform sampling data (FLOAT format)
that is transmitted by " :ACQuisition:SEND? " or queries the current
setting.
Sets the output end point of the waveform display data that is transmitted by
" :ACQuisition:SEND? " or queries the current setting.
Sets the format of the waveform sampling data that is transmitted by
" :ACQuisition:SEND? " or queries the current setting.
Sets whether to hold (ON) or release (OFF) all the waveform sampling data
or queries the current setting.
Queries the total number of points of the waveform sampling specified by
" :ACQuisition:TRACe ."
Queries the waveform sampling data specified by " :ACQuisition:TRACe ." 6-18
Queries the sampling rate of the retrieved data
Sets the output start point of the waveform display data that is transmitted by
" :ACQuisition:SEND? " or queries the current setting.
Sets the target trace of " :ACQuisition:SEND? " or queries the current
setting.
Queries all settings related to the D/A output.
Queries all settings related to the D/A output.
Sets the D/A output items (function, element, and harmonic order) or queries
the current setting.
Sets the rated integration time for the D/A output of integrated values or
queries the current setting.
Sets the method of setting the rated value for the D/A output items or queries
the current setting.
Manually sets the rated maximum and minimum values for the D/A output
items or queries the current setting.
Queries all settings related to the Cycle by Cycle measurement function.
Sets the number of cycles for Cycle by Cycle measurement or queries the
current setting.
Queries all settings related to the Cycle by Cycle display.
Sets the cursor position of the Cycle by Cycle display or queries the current
setting.
Sets the displayed items (function and element) of the Cycle by Cycle display
or queries the current setting.
Sets the number of the displayed page of the Cycle by Cycle display or
queries the current setting.
Queries all settings related to the filter for Cycle by Cycle measurement.
Queries all settings related to the line filter for Cycle by Cycle measurement. 6-22
Collectively sets the line filters of all elements for Cycle by Cycle
measurement
Sets the line filter of individual elements for Cycle by Cycle measurement or
queries the current setting
Sets the motor input line filters for Cycle by Cycle measurement or queries
the current setting
Resets Cycle by Cycle measurement.
Starts Cycle by Cycle measurement.
Queries the Cycle by Cycle measurement status.
Queries all settings related to the synchronization source for Cycle by Cycle
measurement.
1
Page
2
6-17
6-17
3
6-17
6-17 4
6-17
6-18
5
6-18
6-18
6
6-18
7
6-19
6-19
6-19
6-19
App
6-20
6-20
Index
6-21
6-21
6-21
6-21
6-21
6-21
6-22
6-22
6-22
6-22
6-22
6-22
6-22
6-22
6-1