YOKOGAWA WT3001E User Manual page 73

6.7 DISPlay Group
The commands in this group deal with the screen display.
You can make the same settings and inquiries as when the keys in the DISPLAY area and the ITEM & ELEMENT
area on the front panel are used.
:DISPlay?
Function Queries all settings related to the screen display.
:DISPlay?
Syntax
Example • Example when the display mode
( :DISPlay:MODE ) is "NUMeric (numeric
display)"
:DISPLAY? -> :DISPLAY:MODE NUMERIC;
(Response to " :DISPlay:NUMeric? "
with the first " :DISPLAY: " section
removed); :DISPLAY:INFORMATION:
STATE 0;
PAGE 1
• Example when the display mode
( :DISPlay:MODE ) is "WAVE (waveform
display)"
:DISPLAY? -> :DISPLAY:MODE
WAVE; (Response to " :DISPlay:WAVE? "
with the first " :DISPLAY: " section
removed); :DISPLAY:INFORMATION:
STATE 0;
PAGE 1
• Example when the display mode
( :DISPlay:MODE ) is "NWAVe"
:DISPLAY? -> :DISPLAY:MODE NWAVE;
(Response to " :DISPlay:NUMeric? "
with the first " :DISPLAY: " section
removed);(same as the response to
" :DISPlay:WAVE? "); :DISPLAY:
INFORMATION:STATE 0;PAGE 1
Description Returns all settings corresponding to the display
mode ( :DISPlay:MODE ).
:DISPlay:BAR?
Function Queries all settings related to the bar graph.
:DISPlay:BAR?
Syntax
:DISPLAY:BAR? -> :DISPLAY:BAR:
Example
FORMAT SINGLE;ITEM1 U,1;ITEM2 I,1;
ITEM3 P,1;ORDER 1,100
Description This command is valid only on models with the
advanced computation function (/G6 option).
IM WT3001E-17EN
:DISPlay:BAR:FORMat
Function Sets the display format of the bar graph or
queries the current setting.
:DISPlay:BAR:FORMat {SINGle|DUAL|
Syntax
TRIad}
:DISPlay:BAR:FORMat?
:DISPLAY:BAR:FORMAT SINGLE
Example
:DISPLAY:BAR:FORMAT? ->
:DISPLAY:BAR:FORMAT SINGLE
Description This command is valid only on models with the
advanced computation function (/G6 option).
:DISPlay:BAR:ITEM<x>
Function Sets the bar graph item (function and element) or
queries the current setting.
:DISPlay:BAR:ITEM<x> {<Function>,
Syntax
<Element>}
:DISPlay:BAR:ITEM<x>?
<x> = 1 to 3 (item number)
<Function> = {U|I|P|S|Q|LAMBda|...} (See
the function selection list (2) on page 6-46.)
<Element> = 1 to 4
:DISPLAY:BAR:ITEM1 U,1
Example
:DISPLAY:BAR:ITEM1? ->
:DISPLAY:BAR:ITEM1 U,1
Description This command is valid only on models with the
advanced computation function (/G6 option).
1
2
3
4
5
6
7
App
Index
6-29