YOKOGAWA WT3001E User Manual page 55

Command
MEASure Group
:MEASure?
:MEASure:AVERaging?
:MEASure:AVERaging:COUNt
:MEASure:AVERaging[:STATe]
:MEASure:AVERaging:TYPE
:MEASure:COMPensation?
:MEASure:COMPensation:EFFicien
cy
:MEASure:COMPensation:V3A3
:MEASure:COMPensation:WIRing?
:MEASure:COMPensation:WIRing:EL
EMent<x>
:MEASure:DMeasure?
:MEASure:DMeasure[:SIGMA]
:MEASure:DMeasure:SIGMB
:MEASure:EFFiciency?
:MEASure:EFFiciency:ETA<x>
:MEASure:EFFiciency:UDEF<x>
:MEASure:FREQuency?
:MEASure:FREQuency:ITEM<x>
:MEASure:FUNCtion<x>?
:MEASure:FUNCtion<x>:EXPRession Sets the equation of the user-defined function or queries the current setting. 6-79
:MEASure:FUNCtion<x>[:STATe]
:MEASure:FUNCtion<x>:UNIT
:MEASure:MHOLd
:MEASure:PC?
:MEASure:PC:IEC
:MEASure:PC:P<x>
:MEASure:PHASe
:MEASure:SAMPling
:MEASure:SQFormula
:MEASure:SYNChronize
IM WT3001E-17EN
Function
Queries all settings related to the computation.
Queries all settings related to averaging.
Sets the averaging coefficient or queries the current setting.
Turns ON/OFF averaging or queries the current setting.
Sets the averaging type or queries the current setting.
Queries all settings related to the compensation computation.
Turns ON/OFF the efficiency compensation or queries the current setting.
Turns ON/OFF the compensation for the two-wattmeter method or queries
the current setting.
Queries all settings related to the wiring compensation.
Sets the wiring compensation of the element or queries the current setting.
Queries all settings related to the delta computation.
Sets the delta computation mode for wiring unit ΣA or queries the current
setting.
Sets the delta computation mode for wiring unit ΣB or queries the current
setting.
Queries all settings related to the efficiency computation.
Sets the efficiency equation or queries the current setting.
Sets the user-defined parameter used in the efficiency equation or queries
the current setting.
Queries all settings related to frequency measurement.
Sets the frequency measurement item or queries the current setting.
Queries all settings related to user-defined functions.
Enables (ON) or Disables (OFF) the user-defined function or queries the
current setting.
Sets the unit to be added to the computation result of the user-defined
function or queries the current setting.
Enables (ON) or Disables (OFF) MAX HOLD function used in the user-
defined function or queries the current setting.
Queries all settings related to the computation of Pc (Corrected Power).
Sets the equation used to compute Pc (Corrected Power) or queries the
current setting.
Sets the parameter used to compute Pc (Corrected Power) or queries the
current setting.
Sets the display format of the phase difference or queries the current setting. 6-80
Sets the sampling frequency or queries the current setting.
Sets the equation used to compute S (apparent power) and Q (reactive
power) or queries the current setting.
Sets the synchronized measurement mode or queries the current setting.
6.1 List of Commands
Page
6-76
6-76
6-76
6-76
6-77
6-77
6-77
6-77
6-77
6-77
6-77
6-78
6-78
6-78
6-78
6-78
6-79
6-79
6-79
6-79
6-79
6-79
6-79
6-80
6-80
6-80
6-80
6-80
6-11
1
2
3
4
5
6
7
App
Index