Table of Contents
Advertisement
Explanation
IM WT3001E-17EN
Enter the following settings when using a controller to set information that can be
specified through key operation on this instrument or when outputting setup parameters
or output waveform data to the controller.
Baud Rate
Select the baud rate from the following:
1200, 2400, 4800, 9600, 19200, or 38400
Data Format
Select the combination of data length, parity, and stop bit from the following:
8-NO-1, 7-EVEN-1, 7-ODD-1, or 7-NO-2
Handshaking Method
Select the transmit data control and receive data control from the following:
NO-NO, XON-XON, XON-RTS, or CTS-RTS
Terminator
Select the terminator from below. On the menu of this instrument, select the terminator
that is used when transmitting data from this instrument. Use "Lf" or "Cr+Lf" for the
terminator for receiving data on this instrument.
Cr, Lf, or Cr+Lf
2.6 Setting the RS-232 Control
1
2
3
4
5
6
7
App
Index
2-9
Advertisement
Table of Contents
