6.8
FILE Group
The commands in this group deal with file operations.
You can make the same settings and inquiries as when FILE on the front panel is used.
:FILE?
Function
Queries all settings related to the file operation.
Syntax
:FILE?
Example
:FILE? -> (same as the response to
":FILE:SAVE?")
:FILE:CDIRectory
Function
Changes the current directory.
Syntax
:FILE:CDIRectory {<Filename>}
<Filename> = Directory name
Example
:FILE:CDIRECTORY "IMAGE"
Description Specify ".." to move up to the parent
directory.
:FILE:DELete:IMAGe:{TIFF|BMP|PSCRipt|
PNG|JPEG}
Function
Deletes the screen image data file.
Syntax
:FILE:DELete:IMAGe:{TIFF|BMP|
PSCRipt|PNG|JPEG} {<Filename>}
Example
:FILE:DELETE:IMAGE:TIFF "IMAG1"
Description Specify the file name without the extension.
:FILE:DELete:NUMeric:{ASCii|FLOat}
Function
Deletes the numeric data file.
Syntax
:FILE:DELete:NUMeric:{ASCii|
FLOat} {<Filename>}
Example
:FILE:DELETE:NUMERIC:ASCII "NUM1"
Description Specify the file name without the extension.
:FILE:DELete:SETup
Function
Deletes the setup parameter file.
Syntax
:FILE:DELete:SETup {<Filename>}
Example
:FILE:DELETE:SETUP "SETUP1"
Description Specify the file name without the extension.
:FILE:DELete:WAVE:{BINary|ASCii|FLOat}
Function
Deletes the waveform display data file.
Syntax
:FILE:DELete:WAVE:{BINary|ASCii|
FLOat} {<Filename>}
Example
:FILE:DELETE:WAVE:BINARY "WAVE1"
Description Specify the file name without the extension.
IM 760301-17E
:FILE:DRIVe
Function
Sets the target drive.
Syntax
:FILE:DRIVe {PCCard[,<NRf>]|
NETWork|USB,<NRf>[,<NRf>][,<NRf>]}
PCCard = PC card drive
<NRf> = Partition (0 to 3)
NETWork = Network drive
USB = USB memory drive
1st <NRf> = ID number (address)
2nd <NRf> = Partition (0 to 3) or LUN (logical
unit number: 0 to 3)
3rd <NRf> = Partition (0 to 3) when LUN is
specified
Example
:FILE:DRIVE PCCARD
Description • If the drive does not contain partitions, omit
the <NRf> corresponding to partitions.
• "NETWork" can be used when the Ethernet
interface (/C7 option) is installed.
• "USB" can be used when the USB port
(peripheral device) (/C5 option) is installed.
• The second or third <NRf> when USB is
selected can be omitted if the drive is not
partitioned or divided by LUN.
:FILE:FORMat:EXECute
Function
Formats the PC card.
Syntax
:FILE:FORMat:EXECute
Example
:FILE:FORMAT:EXECUTE
:FILE:FREE?
Function
Queries the free disk space (bytes) on the drive.
Syntax
:FILE:FREE?
Example
:FILE:FREE? -> 163840
:FILE:LOAD:ABORt
Function
Aborts file loading.
Syntax
:FILE:LOAD:ABORt
Example
:FILE:LOAD:ABORT
:FILE:LOAD:SETup
Function
Loads the setup parameter file.
Syntax
:FILE:LOAD:SETup {<Filename>}
Example
:FILE:LOAD:SETUP "SETUP1"
Description • Specify the file name without the extension.
• This command is an overlap command.
1
2
3
4
5
6
7
App
Index
6-47