YOKOGAWA WT3001E User Manual page 95

:FILE:SAVE:WAVE[:EXECute]
Function Executes the saving of the waveform display data
file.
:FILE:SAVE:WAVE[:EXECute]
Syntax
{<Filename>}
:FILE:SAVE:WAVE:EXECUTE "WAVE1"
Example
Description • Specify the file name without the extension.
• This command is an overlap command.
:FILE:SAVE:WAVE:TRACe
Function Sets the waveform to be saved or queries the
current setting.
:FILE:SAVE:WAVE:TRACe {U<x>|I<x>|
Syntax
SPEed|TORQue|MATH<x>}
:FILE:SAVE:WAVE:TRACe?
<x> of U<x>, I<x> = 1 to 4 (element)
<x> of MATH<x> = 1 to 2 (MATH)
:FILE:SAVE:WAVE:TRACE U1
Example
:FILE:SAVE:WAVE:TRACE? ->
:FILE:SAVE:WAVE:TRACE U1
Description • This command is valid when the format of the
waveform display data to be saved ( :FILE:
SAVE:WAVE:TYPE ) is "FLOat." When it is
{BINary|ASCii} , all waveforms of which the
display is turned ON are saved.
• {SPEed|TORQue} are valid only on models
with the motor evaluation function (/MTR
option).
• MATH<x> is valid only on models with the
advanced computation function (/G6 option).
:FILE:SAVE:WAVE:TYPE
Function Sets the format of the waveform display data to
be saved or queries the current setting.
:FILE:SAVE:WAVE:TYPE {BINary|ASCii|
Syntax
FLOat}
:FILE:SAVE:WAVE:TYPE?
:FILE:SAVE:WAVE:TYPE BINARY
Example
:FILE:SAVE:WAVE:TYPE? ->
:FILE:SAVE:WAVE:TYPE BINARY
IM WT3001E-17EN
6.8 FILE Group
1
2
3
4
5
6
7
App
Index
6-51