Table of Contents
Advertisement
6.4
CBCycle Group
The CBCycle group contains commands related to Cycle by Cycle measurement functions.
These commands allow you to enter and query the same settings that are available under ITEM in the "CbyC Items"
menu and under FORM in the "CbyC Form" menu on the front panel.
:CBCycle?
Function
Queries all settings related to the Cycle by Cycle
measurement function.
:CBCycle?
Syntax
:CBCYCLE? -> :CBCYCLE:SYNCHRONIZE:
Example
SOURCE U1;SLOPE RISE;:CBCYCLE:
TRIGGER:MODE AUTO;SOURCE U1;
SLOPE RISE;LEVEL 0.0;:CBCYCLE:
COUNT 100;TIMEOUT 10;FILTER:LINE:
ELEMENT1 50.0E+03;
ELEMENT2 50.0E+03;
ELEMENT3 50.0E+03;ELEMENT4 50.0E+03
:CBCycle:COUNt
Function
Sets the number of cycles for Cycle by Cycle
measurement or queries the current setting.
:CBCycle:COUNt {<NRf>}
Syntax
:CBCycle:COUNt?
<NRf> = 1 to 3000 (number of measured cycles)
:CBCYCLE:COUNT 100
Example
:CBCYCLE:COUNT? ->
:CBCYCLE:COUNT 100
:CBCycle:DISPlay?
Function
Queries all settings related to the Cycle by Cycle
display.
:CBCycle:DISPlay?
Syntax
:CBCYCLE:DISPLAY? ->
Example
:CBCYCLE:DISPLAY:ITEM1 FREQ;
ITEM2 U,1;ITEM3 I,1;ITEM4 P,1;
ITEM5 S,1;CURSOR 1
:CBCycle:DISPlay:CURSor
Function
Sets the cursor position of the Cycle by Cycle
display or queries the current setting.
:CBCycle:DISPlay:CURSor {<NRf>}
Syntax
:CBCycle:DISPlay:CURSor?
<NRf> = 1 to 3000 (cursor position)
:CBCYCLE:DISPLAY:CURSOR 1
Example
:CBCYCLE:DISPLAY:CURSOR? ->
:CBCYCLE:DISPLAY:CURSOR 1
Description • Specifies the cursor position by the cycle
number.
• You can make the same setting or query
with the " :DISPlay:CBCycle:CURSor "
command.
IM WT3001E-17EN
:CBCycle:DISPlay:ITEM<x>
Function
Sets the displayed items (function and element)
of the Cycle by Cycle display or queries the
current setting.
:CBCycle:DISPlay:
Syntax
ITEM<x> {<Function>,<Element>}
:CBCycle:DISPlay:ITEM<x>?
<x> = 1 to 5 (item number)
<Function> = {FREQ|U|I|P|S|Q|LAMBda|
SPEed|TORQue|PM}
<Element> = {<NRf>|SIGMa|SIGMB} (<NRf>
= 1 to 4)
:CBCYCLE:DISPLAY:ITEM1 U,1
Example
:CBCYCLE:DISPLAY:ITEM1? ->
:CBCYCLE:DISPLAY:ITEM1 U,1
Description • When <Function> = {FREQ|SPEed|
TORQue|PM} , <Element> need not be
specified.
<Element> is omitted from the response.
• When <Element> is omitted, Element 1 is set.
• {SPEed|TORQue|PM} is only valid on models
with the motor evaluation function (/MTR
option).
• You can make the same setting or query
with the " :DISPlay:CBCycle:ITEM<x> "
command.
:CBCycle:DISPlay:PAGE
Function
Sets the number of the displayed page of the
Cycle by Cycle display or queries the current
setting.
:CBCycle:DISPlay:PAGE {<NRf>}
Syntax
:CBCycle:DISPlay:PAGE?
<NRf> = 1 to 150 (page number)
:CBCYCLE:DISPLAY:PAGE 1
Example
:CBCYCLE:DISPLAY:PAGE? ->
:CBCYCLE:DISPLAY:PAGE 1
Description • When a page number is set, the cursor moves
to the top of the specified page.
• You can make the same setting or query
with the " :DISPlay:CBCycle:CURSor "
command.
1
2
3
4
5
6
7
App
Index
6-21
Advertisement
Table of Contents
